Milco Wire China EDM provides a full suite of China EDM services including small hole, sinker, and wire edm. For your next project contact Milco today! http://www.milcow…
Aluminium Machining China
Milco Wire China EDM provides a full suite of China EDM services including small hole, sinker, and wire edm. For your next project contact Milco today! http://www.milcow…
Precision China Turning – DMC China Machine Tools DL 6T ANY QUESTIONS/COMMENTS CALL 877-687-3188.
Video Rating: 0 / 5
To learn more about OEM precision China China Turning steel part ,pls contact Ray @ sales05@joinconn.com Tel:0086 76983105835 fax:0086 769 8310 5845 skype:sales2_juwang.
http://www.toolstoday.com Your Source for the Finest Carbide Tipped, Solid Carbide & Carbide Insert China Cutting Tools Router Bits, Saw Blades, Shaper Cutters, Bo…
A few nice internal cylindrical grinding images I found:
Minaret of Jam, Ghor Province, western Afghanistan
Image by james_gordon_losangeles
The Minaret of Jam stands sixty-five meters tall in a deep rugged valley at the juncture of the Hari and Jam rivers, approximately one hundred kilometers east of Herat. It was built by Ghurid sultan Ghiyath al-Din Muhammad bin Sam (1163-1203). The foundation plaque above the base on the north side has been read differently by Pinder-Wilson and by Sourdel-Thomine as 1194/95 and 1174/75. The earlier date supports the prevailing argument that the minaret was erected alone to commemorate the Ghurid conquest of Ghazna in 1173. Remains of a settlement on the northern bank of Hari and surrounding hillsides, and pottery fragments collected in the area suggest that the site may be the lost Ghurid capital of Firuzkuh destroyed by Genghis Khan in 1222. Remains of a fort or castle are seen on a hilltop to the east of the minaret.
Made entirely of fired brick, the minaret is composed of a two-tier cylindrical body raised seven meters on an octagonal base. Two spiral staircases, accessed from a single doorway above the ground, provide access to two balconies atop the lower shaft and midway up the upper shaft, visiting six vaulted chambers located in between. Only the supports have remained of the brick balconies. The minaret is capped at sixty-five meters with a cupola (now damaged) raised on six open archways.
The two towers of the minaret shaft differ structurally. The broad lower shaft is made of thick walls enveloping two spiral staircases at center; it rises to a height of thirty-eight meters, with an exterior diameter diminishing from 9.7 meters at the base to 6 meters at top. The narrow upper shaft, by contrast, has a central void spanned by six cross-vaults resting on four internal buttresses. The stairs are here channeled into the narrow spaces between the walls and the buttresses.
The rich decoration of the minaret, executed with tiles and terracotta in high relief, has largely survived and was analyzed in detail by Sourdel-Thomine. The upper shaft features three epigraphic bands — one below the cupola and two below the second balcony — that contain the shahada, Quranic verses from Sura al-Saff and the name of Ghiyath al-Din, respectively. The two lower bands are separated by a thick decorative band featuring a symbolic vase motif found in the Ghazna palace of Mas’ud III and on coins issued at Firuzkuh.
The lower shaft is covered entirely with eight vertical tile panels that lead up to a thick epigraphic band below the first balcony. Each panel here features a braid of geometric shapes framed with a continuous kufic inscription (Sura Maryam, Quran 19) and filled in with interlacing geometric patterns. The braid motif on the east and west facing panels, which mark the original entrance and the direction of qibla, are distinguished with the use of eight-pointed stars. The dedicatory inscription above the panels includes the name and celebratory titles of Ghiyath al-Din, written in a floriated kufic script highlighted with turquoise glazed tiles. It is framed with tile bands of varying width, including series of circles and roundels fitted with floral inserts. A cursive inscription, placed halfway up on the eastern panel, gives the name of the architect, ‘Ali ibn Ibrahim of Nishapur. Fragments remaining of the fifth epigraphic band on the base of the minaret show that it also contained titles of the Ghurid sultan in a knotted kufic script.
Stabilization efforts for the Jam Minaret began in the 1960s following a survey by the Instituto Italiano per il Media ed Estremo Oriente (ISMEO) that warned of collapse due to soil erosion at the minaret base. A temporary dam was built of stone and wood in 1963-64, and followed by the construction of a gabion wall by UNESCO in 1978. Preservation efforts halted by the civil war were resumed in 1999 and in 2001 with the construction of additional walls and gabions along the Jam and Hari rivers. The minaret and the surrounding archaeological site were amended to the UNESCO list of World Heritage in Danger in 2002. Illegal excavations since 2001 have compromised the historical integrity of the archaeological site.
Minaret of Jam, Ghor Province, western Afghanistan
Image by james_gordon_losangeles
The Minaret of Jam stands sixty-five meters tall in a deep rugged valley at the juncture of the Hari and Jam rivers, approximately one hundred kilometers east of Herat. It was built by Ghurid sultan Ghiyath al-Din Muhammad bin Sam (1163-1203). The foundation plaque above the base on the north side has been read differently by Pinder-Wilson and by Sourdel-Thomine as 1194/95 and 1174/75. The earlier date supports the prevailing argument that the minaret was erected alone to commemorate the Ghurid conquest of Ghazna in 1173. Remains of a settlement on the northern bank of Hari and surrounding hillsides, and pottery fragments collected in the area suggest that the site may be the lost Ghurid capital of Firuzkuh destroyed by Genghis Khan in 1222. Remains of a fort or castle are seen on a hilltop to the east of the minaret.
Made entirely of fired brick, the minaret is composed of a two-tier cylindrical body raised seven meters on an octagonal base. Two spiral staircases, accessed from a single doorway above the ground, provide access to two balconies atop the lower shaft and midway up the upper shaft, visiting six vaulted chambers located in between. Only the supports have remained of the brick balconies. The minaret is capped at sixty-five meters with a cupola (now damaged) raised on six open archways.
The two towers of the minaret shaft differ structurally. The broad lower shaft is made of thick walls enveloping two spiral staircases at center; it rises to a height of thirty-eight meters, with an exterior diameter diminishing from 9.7 meters at the base to 6 meters at top. The narrow upper shaft, by contrast, has a central void spanned by six cross-vaults resting on four internal buttresses. The stairs are here channeled into the narrow spaces between the walls and the buttresses.
The rich decoration of the minaret, executed with tiles and terracotta in high relief, has largely survived and was analyzed in detail by Sourdel-Thomine. The upper shaft features three epigraphic bands — one below the cupola and two below the second balcony — that contain the shahada, Quranic verses from Sura al-Saff and the name of Ghiyath al-Din, respectively. The two lower bands are separated by a thick decorative band featuring a symbolic vase motif found in the Ghazna palace of Mas’ud III and on coins issued at Firuzkuh.
The lower shaft is covered entirely with eight vertical tile panels that lead up to a thick epigraphic band below the first balcony. Each panel here features a braid of geometric shapes framed with a continuous kufic inscription (Sura Maryam, Quran 19) and filled in with interlacing geometric patterns. The braid motif on the east and west facing panels, which mark the original entrance and the direction of qibla, are distinguished with the use of eight-pointed stars. The dedicatory inscription above the panels includes the name and celebratory titles of Ghiyath al-Din, written in a floriated kufic script highlighted with turquoise glazed tiles. It is framed with tile bands of varying width, including series of circles and roundels fitted with floral inserts. A cursive inscription, placed halfway up on the eastern panel, gives the name of the architect, ‘Ali ibn Ibrahim of Nishapur. Fragments remaining of the fifth epigraphic band on the base of the minaret show that it also contained titles of the Ghurid sultan in a knotted kufic script.
Stabilization efforts for the Jam Minaret began in the 1960s following a survey by the Instituto Italiano per il Media ed Estremo Oriente (ISMEO) that warned of collapse due to soil erosion at the minaret base. A temporary dam was built of stone and wood in 1963-64, and followed by the construction of a gabion wall by UNESCO in 1978. Preservation efforts halted by the civil war were resumed in 1999 and in 2001 with the construction of additional walls and gabions along the Jam and Hari rivers. The minaret and the surrounding archaeological site were amended to the UNESCO list of World Heritage in Danger in 2002. Illegal excavations since 2001 have compromised the historical integrity of the archaeological site.
wire edm cutting eBay auctions you should keep an eye on:
[wprebay kw=”wire+edm+cutting” num=”8″ ebcat=”-1″]
[wprebay kw=”wire+edm+cutting” num=”9″ ebcat=”-1″]
wire edm eBay auctions you should keep an eye on:
[wprebay kw=”wire+edm” num=”5″ ebcat=”-1″]
[wprebay kw=”wire+edm” num=”6″ ebcat=”-1″]
Check out these precision tool grinding images:
the precision tool
Image by Jesper2cv
Een vriend van mij plachtte te zeggen: "Altijd maatgereedschap gebruiken", maar soms heb je genoeg aan één stuk gereedschap…
A good friend of mine used to say: "Always use a precision tool", but sometimes one tool fits all purposes…
Morse Taper Sleeves
Image by tudedude
Used for fitting different sized Morse Tapers into China Machinery
Solar + Storage Is Close To An Inflection Point
We think that with investing in solar energy companies, you'll have strong trends as tailwinds. In essence, solar energy is … These are the more gradual improvements, although collectively they've produced enormous gains that aren't likely to come to …
Read more on Seeking Alpha (registration)
Woodworking Tooling Company Acquires NY Company
The national supplier and manufacturer of cutting tools for wood, plastic, metal and composites now has expanded ability to service clients in the New England and New York City area. Connecticut Saw & Tool “The purchase of Third Avenue China Grinding Shop …
Read more on woodworkingnetwork.com
Some cool turning cnc images:
Tiger Swallowtail, female
Image by Vicki’s Nature
This state butterfly of Georgia was everywhere at the nature center yesterday – I saw at least 30-40. There were 17 on one patch of yellow flowers – and for those interested, of the 17 three were dark females. When I turned on our sprinkler this morning, 3 yellow Tiger’s flew out of the lantana.
Btw I saw the first "yard" Gulf Fritillary this morning. Hopefully I’ll get some shots … it’s going to 95o again in Atlanta today – stay cool you all!
Winner, Beautiful World Challenge Group 10, Butterflies, 8-10
Winner, The Big Momma Award, The Mother of All Challenge Groups, birds, bugs & babies 8-10
Winner (Sweep), Game, Stripes, 5-11
machine parts manufacturers eBay auctions you should keep an eye on:
[wprebay kw=”machine+parts+manufacturers” num=”0″ ebcat=”-1″]
[wprebay kw=”machine+parts+manufacturers” num=”1″ ebcat=”-1″]
[wprebay kw=”machine+parts+manufacturers” num=”2″ ebcat=”-1″]