Nice Machined Components Manufacturers images

Nice Machined Components Manufacturers images

A few good machined components makers photos I located:

Steven F. Udvar-Hazy Center: primary hall panorama (SR-71, Space Shuttle, F-4 Corsair, et al)

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

No reconnaissance aircraft in history has operated globally in much more hostile airspace or with such total impunity than the SR-71, the world’s fastest jet-propelled aircraft. The Blackbird’s efficiency and operational achievements placed it at the pinnacle of aviation technologies developments for the duration of the Cold War.

This Blackbird accrued about 2,800 hours of flight time for the duration of 24 years of active service with the U.S. Air Force. On its last flight, March six, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, four minutes, and 20 seconds, averaging 3,418 kilometers (2,124 miles) per hour. At the flight’s conclusion, they landed at Washington-Dulles International Airport and turned the airplane more than to the Smithsonian.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Corporation

Designer:
Clarence L. &quotKelly&quot Johnson

Date:
1964

Country of Origin:
United States of America

Dimensions:
All round: 18ft five 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)
Other: 18ft five 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

Components:
Titanium

Physical Description:
Twin-engine, two-seat, supersonic strategic reconnaissance aircraft airframe constructed largley of titanium and its alloys vertical tail fins are constructed of a composite (laminated plastic-sort material) to decrease radar cross-section Pratt and Whitney J58 (JT11D-20B) turbojet engines feature massive inlet shock cones.

• • • • •

Quoting Smithsonian National Air and Space Museum | Vought F4U-1D Corsair:

By V-J Day, September two, 1945, Corsair pilots had amassed an 11:1 kill ratio against enemy aircraft. The aircraft’s distinctive inverted gull-wing style allowed ground clearance for the large, 3-bladed Hamilton Regular Hydromatic propeller, which spanned far more than 4 meters (13 feet). The Pratt and Whitney R-2800 radial engine and Hydromatic propeller was the biggest and 1 of the most powerful engine-propeller combinations ever flown on a fighter aircraft.

Charles Lindbergh flew bombing missions in a Corsair with Marine Air Group 31 against Japanese strongholds in the Pacific in 1944. This airplane is painted in the colors and markings of the Corsair Sun Setter, a Marine close-assistance fighter assigned to the USS Essex in July 1944.

Transferred from the United States Navy.

Manufacturer:
Vought Aircraft Business

Date:
1940

Country of Origin:
United States of America

Dimensions:
All round: 460 x 1020cm, 4037kg, 1250cm (15ft 1 1/8in. x 33ft five 9/16in., 8900lb., 41ft 1/8in.)

Supplies:
All metal with fabric-covered wings behind the main spar.

Physical Description:
R-2800 radial air-cooled engine with 1,850 horsepower, turned a 3-blade Hamilton Regular Hydromatic propeller with solid aluminum blades spanning 13 feet 1 inch wing bent gull-shaped on each sides of the fuselage.

• • • • •

See more images of this, and the Wikipedia article.

Information, quoting from Smithsonian National Air and Space Museum | Space Shuttle Enterprise:

Manufacturer:
Rockwell International Corporation

Nation of Origin:
United States of America

Dimensions:
All round: 57 ft. tall x 122 ft. lengthy x 78 ft. wing span, 150,000 lb.
(1737.36 x 3718.57 x 2377.44cm, 68039.6kg)

Components:
Aluminum airframe and body with some fiberglass characteristics payload bay doors are graphite epoxy composite thermal tiles are simulated (polyurethane foam) except for test samples of actual tiles and thermal blankets.

The first Space Shuttle orbiter, &quotEnterprise,&quot is a full-scale test automobile utilised for flights in the atmosphere and tests on the ground it is not equipped for spaceflight. Even though the airframe and flight handle elements are like these of the Shuttles flown in space, this vehicle has no propulsion technique and only simulated thermal tiles due to the fact these features had been not necessary for atmospheric and ground tests. &quotEnterprise&quot was rolled out at Rockwell International’s assembly facility in Palmdale, California, in 1976. In 1977, it entered service for a nine-month-extended approach-and-landing test flight system. Thereafter it was utilised for vibration tests and fit checks at NASA centers, and it also appeared in the 1983 Paris Air Show and the 1984 World’s Fair in New Orleans. In 1985, NASA transferred &quotEnterprise&quot to the Smithsonian Institution’s National Air and Space Museum.

Transferred from National Aeronautics and Space Administration

Bidimensional SPEED

Image by 16:9clue
Amongst the most crucial industrial makers in Mexico is the automotive sector, whose standards of high quality are internationally recognized. The automobile sector in Mexico differs from that in other Latin American countries and developing nations in that it does not function as a mere assembly manufacturer. In 2007 one particular out every seven automobiles sold was produced in Mexico. The sector produces technologically complicated elements and engages in some research and development activities.

The &quotBig 3&quot (Basic Motors, Ford and Chrysler) have been operating in Mexico given that the 1930s, although Volkswagen and Nissan built their plants in the 1960s. Later, Toyota, Honda, BMW, and Mercedes-Benz established a presence. Given the high specifications of North American components in the business, numerous European and Asian parts suppliers have also moved to Mexico: in Puebla alone, 70 industrial portion-makers cluster around Volkswagen. The reasonably modest domestic car business is represented by DINA Camiones S.A. de C.V., which has built buses and trucks for virtually half a century, and the new Mastretta organization that builds the higher functionality Mastretta MXT sports auto.

The Ford Mustang Mach 1 was a functionality model of the Ford Mustang that Ford developed beginning in 1969. The name &quotmach 1&quot as used by Ford was initially introduced in 1959 on a idea &quotLevacar&quot originally shown in the Ford Rotunda. This idea &quotvehicle&quot utilized a cushion of air as propulsion on a circular dais.
Oaxaca, Mexico.

Post-production: edited by Picnik
(neighborhood contrasts, temperature, saturation, sharpness)

Cool Machined Components Manufacturers images

Cool Machined Components Manufacturers images

A handful of good machined components companies pictures I discovered:

TRIUMPH TROPHY TR5. REAR IN HUB SUSPENSION. 500 CC TWIN CYLINDER.

Image by ronsaunders47
The Triumph TR5 Trophy was a British motorcycle produced by Triumph Motorcycles at their Meriden factory. Based on the Triumph Speed Twin, the TR5 was a trials machine created for off road use with a higher level two into a single exhaust and very good handling on public roads. [1] The name ‘Trophy’ came from the three ‘specials’ that Triumph built for the Italian International Six Day Trials in 1948, which went on to win 3 gold medals and the manufacturers group trophy.[two] Featuring prominently in the AMC &quotClass C&quot racing till 1969, the American export models included elements from rhe Triumph Tiger 100 to generate a motorcycle for desert competitors.[three]

From 1951 the 498cc engine (utilised as aircraft generators throughout World War II was updated with a new alloy barrels and heads. The TR5 was replaced with a new variety of unit building twins in 1959.[two] The Trophy name was resurrected for the Triumph TR6 Trophy in 1970 and the Trophy 500 (T100C) in 1971, which in turn was replaced by the Triumph Trophy Trail (TR5T) in 1973. The Hinckley Triumph organization employed the Trophy name for the Triumph Trophy 900 and Triumph Trophy 1200 models.

Renowned Riders
The Fonz , a character played by Henry Winkler in the well-known and lengthy operating American sit-com Pleased Days rode a Triumph TR5 Trophy. Both the character and bike were available as an MPC model kit in the 1970s.

In an attempt to ape Marlon Brando and his 6T Triumph Thunderbird, James Dean bought a Triumph TR5 Trophy. Phil Stern’s popular series of photographs of Dean show him upon this bike which although sold right after the actor’s untimely death, was recovered and restored prior to getting displayed at the James Dean Museum in Fairmount, Indiana.

Calix Ceramic Solutions&#39 Sintered SiC has been Machined via each Wire EDM

Calix Ceramic Options&#39 Sintered SiC has been Machined via each Wire EDM
The material&#39s high density and uniform low electrical resistivity enable it to be a profitable EDM material. See photo which demonstrates material has been machined by way of each Wire EDM and Die Sinking EDM processing. Calix Ceramic Options&nbsp…
Read much more on ThomasNet News (press release) (blog)

Compact, optimised and rigidly-constructed wire EDM machine
The Cut E 350 is a compact and rigidly-constructed wire EDM machine that offers toolmakers with high accuracy, improved productivity and optimised process reliability, the organization says. It is created for machining higher-precision complicated parts quickly and&nbsp…
Read far more on ETMM On-line

Lastest Machined Components Companies News

Assessment: Lancer L30 Heavy Metal Rifle
A lesser-identified name in the crowded field of semi-automatic, AR-style rifle manufacturers, Lancer Systems of Quakertown, Pa., is no newcomer. In reality, the company started engineering its very first such gun, the 5.56×45 mm … Machined from a billet of 7075-T6 …
Study more on American Rifleman (press release) (weblog)

EKWB EK-XLC Predator 240 Liquid CPU Cooler Assessment
… we have the 240 mm variant on the test bench. Extended recognized as a supplier of water blocks (the WB in EKWB stands for water blocks, after all) and other components for custom liquid cooling, how will EKWB&#39s foray into self-contained liquid CPU coolers fare …
Study more on Computer Perspectives

LSX Drag Radial Engine Create Portion 1: The Brief Block
Soon after speaking with some of the greatest minds in the automotive racing business, we&#39ve been in a position to load the parts bin for our 275 drag radial LSX develop with some of the leading elements offered in the market. Earlier in the series, we discussed Dart&#39s LS …
Study far more on DragZine.com

Good Manufacturer Of Precision Machined Elements photos

Good Manufacturer Of Precision Machined Elements photos

Some cool manufacturer of precision machined elements images:

Steven F. Udvar-Hazy Center: B-29 Superfortress “Enola Gay” panorama

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of World War II and the 1st bomber to residence its crew in pressurized compartments. Although designed to fight in the European theater, the B-29 identified its niche on the other side of the globe. In the Pacific, B-29s delivered a assortment of aerial weapons: conventional bombs, incendiary bombs, mines, and two nuclear weapons.

On August six, 1945, this Martin-constructed B-29-45-MO dropped the first atomic weapon utilised in combat on Hiroshima, Japan. Three days later, Bockscar (on display at the U.S. Air Force Museum near Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Great Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Country of Origin:
United States of America

Dimensions:
All round: 900 x 3020cm, 32580kg, 4300cm (29ft six five/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Components:
Polished general aluminum finish

Physical Description:
Four-engine heavy bomber with semi-monoqoque fuselage and higher-aspect ratio wings. Polished aluminum finish all round, standard late-Planet War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on lower left nose.

Steven F. Udvar-Hazy Center: B-29 Superfortress &quotEnola Gay&quot panorama

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Globe War II and the very first bomber to home its crew in pressurized compartments. Even though created to fight in the European theater, the B-29 identified its niche on the other side of the globe. In the Pacific, B-29s delivered a selection of aerial weapons: standard bombs, incendiary bombs, mines, and two nuclear weapons.

On August 6, 1945, this Martin-built B-29-45-MO dropped the very first atomic weapon utilized in combat on Hiroshima, Japan. Three days later, Bockscar (on show at the U.S. Air Force Museum near Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Fantastic Artiste, flew as an observation aircraft on each missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Country of Origin:
United States of America

Dimensions:
All round: 900 x 3020cm, 32580kg, 4300cm (29ft six five/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Supplies:
Polished general aluminum finish

Physical Description:
4-engine heavy bomber with semi-monoqoque fuselage and higher-aspect ratio wings. Polished aluminum finish all round, normal late-Planet War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on reduce left nose.

Steven F. Udvar-Hazy Center: Kawanishi N1K2-Ja Shiden Kai “George”

Image by Chris Devers
See a lot more images of this, and the Wikipedia write-up.

Details, quoting from Smithsonian National Air and Space Museum: Steven F. Udvar-Hazy | Kawanishi N1K2-Ja Shiden (Violet Lightning) Kai (Modified) &quotGEORGE&quot:

GEORGE is the unlikely Allied nickname for the greatest Japanese naval fighter made in quantity during Globe War II. The official Japanese name and designation was Kawanishi N1K2 Shiden (Violet Lightning). This outstanding land-based fighter sprang straight from a floatplane fighter design and style, the N1K1 REX (see NASM collection).

A lot of countries utilized floatplanes for scouting and reconnaissance duties, and to hunt submarines and surface ships, but only Japan built and fielded fighters on floats. The Japanese Imperial Navy intended to use these specialized aircraft to achieve air superiority above a beachhead to support amphibious landing operations where carrier or land-based fighters have been unavailable. The Kawanishi N1K1 (Allied codename REX) was the only airplane designed particularly for this purpose to fly throughout World War II.

In September 1940, the Japanese Navy issued a specification for floatplane fighters capable of supporting offensive naval operations. A group of engineers like Toshihara Baba, Shizuo Kikuhara, Hiroyuki Inoue, and Elizaburo Adachi had readied the very first prototype by May possibly 1942, and it flew on May possibly 6. Tests showed that the speed of new airplane was only slightly less than the Mitsubishi A6M Zero (see NASM collection) and the amphibious fighter was practically as maneuverable as its land-based cousin. This was exceptional performance for an aircraft that could not retract or jettison its enormous landing gear.

Long just before the initial Kyofu flew, Kawanishi engineers believed that the standard design and style would also make an excellent land-primarily based fighter. The conversion appeared to entail just replacing the primary and wingtip floats with a conventional landing gear. The organization decided to develop this variant as a private venture. As the project unfolded, the engineers decided to replace the 14-cylinder engine with a new 18-cylinder model expected to create about 2,000 horsepower. The new engine required a bigger propeller and this element, in turn, needed abnormally extended landing gear struts to stop the blade suggestions from contacting the ground. Kawanishi flew the initial N1K1-J land-based fighter on December 27, 1942. The new engine failed to deliver the anticipated energy and the landing gear functioned poorly. The airplane also fell brief of projected speed (649 kph – 403 mph) by 74 kph (46 mph) and could handle only 575 kph (357 mph). This was more quickly than the Mitsubishi A6M Zero ZEKE, nonetheless, and the Japanese Navy badly required an efficient counter to new American naval fighter aircraft such as the Grumman F6F Hellcat and Vought F4U Corsair (see NASM collection). The Japanese Navy ordered Kawanishi to abandon two other fighter projects and begin developing Shidens.

By the end of 1943, Kawanishi delivered about 70 of the new fighters and the Navy employed these airplanes for pilot familiarization and instruction. Expecting Allied amphibious landings in the Philippines, the Navy sent the very first Shiden unit to Cebu in time to challenge Allied air power supporting the invasion of that island in October 1944. Engine, landing gear, logistics, and maintenance difficulties plagued the Shiden units but Allied pilots realized they faced a excellent new Japanese fighter.

With N1K1-J production underway and Shidens flying combat missions, Kawanishi set about refining the style. They lowered the wings from mid-fuselage and the further ground clearance permitted the engineers to install a shorter, a lot more traditional and significantly less-troublesome landing gear, simplified the fuselage structure, and redesigned the empennage. Only the wings and armament remained from the initial style. The engine continued to give problems, but the Navy was impressed with these improvements and ordered the new version into production as the N1K2-J Shiden Kai (modified). In air-to-air combat, seasoned Japanese pilots flying Shiden Kais could far more than hold their own against most American pilots flying F6F Hellcats. In February 1945, a brave pilot, Warrant Officer Muto, single-handedly engaged 12 Hellcats and shot down four of them just before the remainder disengaged. Flying intercept missions against Boeing B-29 Superfortresses above the residence islands, the Shiden Kai was much less effective since of inadequate climb speed and power loss at higher altitudes.

Kawanishi created several other variants and planned much more when the war ended. About 1,500 of the different models have been developed. In battle more than Formosa (Taiwan), the Philippines, Okinawa, and the home islands, Shiden pilots acquitted themselves well but this outstanding airplane was another good design and style that appeared also late and in also couple of numbers to reverse Japan’s fortunes in the air war.

NASM’s Shiden Kai is 1 of three remaining right now. The other two are displayed at the U. S. Air Force Museum in Dayton, Ohio, and the New England Air Museum in Windsor Locks, Connecticut. American intelligence units collected 4 GEORGE fighters from a variety of Japanese airfields and delivered them to Yokosuka Naval Shipyard for shipment to the United States. The NASM GEORGE came from Omura or Oppama Naval Air Station, Japan, and the fighter arrived stateside aboard the escort carrier &quotUSS Barnes.&quot It was almost certainly evaluated at the Naval Aircraft Factory at Philadelphia, and then moved to Willow Grove Naval Air Station. The GEORGE remained outdoors on show and steadily deteriorated along with a group of German and Japanese airplanes until 1983 when the Smithsonian Institution acquired it. The airplane was stored at the Paul Garber Facility till NASM loaned it to the Champlin Fighter Museum in Mesa, Arizona, for restoration in December 1991 and the project was completed in November 1994. The restored Shiden Kai wears the colors and markings of the 343rd Kokutai, a unit stationed at Omura Naval Air Station in 1945.

Transferred from the United States Navy.

Manufacturer:
Kawanishi Kokuki K. K.

Date:
1942

Nation of Origin:
Japan

Dimensions:
General: 400 x 930cm, 2675kg, 1200cm (13ft 1 1/2in. x 30ft 6 1/8in., 5897.3lb., 39ft 4 7/16in.)

Supplies:
All-metal monocoque building

Physical Description:
Single-engine, low-wing monoplane, conventional layout with tailwheel landing gear.

Lastest Cnc Machined Elements Manufacturer News

Seco Tools manufacturing event returns in September
Kingsbury, GF Machining Options, Heller and Mills CNC among other people. They will be showcasing and demonstrating their latest items and technologies to guests. The occasion also … These include: the most powerful and expense-effective methods of …
Read a lot more on Machinery

Iowa teachers get summer lessons via &#39externships&#39
Cedar Falls Higher College industrial technologies teacher Chad Anderson learned more about pc numerical manage, or CNC, machining for the duration of an externship at Geater Machining &amp Manufacturing, Co., which tends to make a lot more than 7,000 parts annually for the&nbsp…
Read a lot more on Newton Day-to-day News

Nice Manufacturer Of Precision Machined Components pictures

Nice Manufacturer Of Precision Machined Components pictures

Check out these manufacturer of precision machined components photos:

Steven F. Udvar-Hazy Center: B-29 Superfortress “Enola Gay”

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Globe War II and the first bomber to residence its crew in pressurized compartments. Despite the fact that developed to fight in the European theater, the B-29 located its niche on the other side of the globe. In the Pacific, B-29s delivered a assortment of aerial weapons: standard bombs, incendiary bombs, mines, and two nuclear weapons.

On August 6, 1945, this Martin-constructed B-29-45-MO dropped the 1st atomic weapon utilised in combat on Hiroshima, Japan. Three days later, Bockscar (on show at the U.S. Air Force Museum close to Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Great Artiste, flew as an observation aircraft on each missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Nation of Origin:
United States of America

Dimensions:
All round: 900 x 3020cm, 32580kg, 4300cm (29ft 6 five/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Components:
Polished general aluminum finish

Physical Description:
Four-engine heavy bomber with semi-monoqoque fuselage and higher-aspect ratio wings. Polished aluminum finish general, standard late-Planet War II Army Air Forces insignia on wings and aft fuselage and serial quantity on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on lower left nose.

Steven F. Udvar-Hazy Center: South hangar panorama, like Vought OS2U-3 Kingfisher seaplane, B-29 Enola Gay

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Vought OS2U-3 Kingfisher:

The Kingfisher was the U.S. Navy’s main ship-based, scout and observation aircraft throughout Planet War II. Revolutionary spot welding strategies gave it a smooth, non-buckling fuselage structure. Deflector plate flaps that hung from the wing’s trailing edge and spoiler-augmented ailerons functioned like added flaps to permit slower landing speeds. Most OS2Us operated in the Pacific, exactly where they rescued a lot of downed airmen, which includes World War I ace Eddie Rickenbacker and the crew of his B-17 Flying Fortress.

In March 1942, this airplane was assigned to the battleship USS Indiana. It later underwent a six-month overhaul in California, returned to Pearl Harbor, and rejoined the Indiana in March 1944. Lt. j.g. Rollin M. Batten Jr. was awarded the Navy Cross for generating a daring rescue in this airplane under heavy enemy fire on July 4, 1944.

Transferred from the United States Navy.

Manufacturer:
Vought-Sikorsky Aircraft Division

Date:
1937

Country of Origin:
United States of America

Dimensions:
General: 15ft 1 1/8in. x 33ft 9 1/2in., 4122.6lb., 36ft 1 1/16in. (460 x 1030cm, 1870kg, 1100cm)

Supplies:
Wings covered with fabric aft of the primary spar

Physical Description:
Two-seat monoplane, deflector plate flaps hung from the trailing edge of the wing, ailerons drooped at low airspeeds to function like added flaps, spoilers.

• • • • •

Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Planet War II and the first bomber to residence its crew in pressurized compartments. Though designed to fight in the European theater, the B-29 located its niche on the other side of the globe. In the Pacific, B-29s delivered a variety of aerial weapons: standard bombs, incendiary bombs, mines, and two nuclear weapons.

On August six, 1945, this Martin-built B-29-45-MO dropped the very first atomic weapon employed in combat on Hiroshima, Japan. 3 days later, Bockscar (on show at the U.S. Air Force Museum close to Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Excellent Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Nation of Origin:
United States of America

Dimensions:
Overall: 900 x 3020cm, 32580kg, 4300cm (29ft 6 5/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Materials:
Polished all round aluminum finish

Physical Description:
4-engine heavy bomber with semi-monoqoque fuselage and high-aspect ratio wings. Polished aluminum finish overall, standard late-World War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on reduce left nose.

Cool Machined Components Makers photos

Cool Machined Components Makers photos

Some cool machined elements makers photos:

Jaguar E-Kind four.2 at Samuel’s in Allston: Engine view

Image by Chris Devers
Quoting from Wikipedia: Jaguar E-Sort:

• • • • •

The Jaguar E-Variety (UK) or XK-E (US) is a British automobile manufactured by Jaguar amongst 1961 and 1974. Its combination of very good looks, higher functionality, and competitive pricing established the marque as an icon of 1960s motoring. A fantastic achievement for Jaguar, over seventy thousand E-Varieties were sold in the course of its lifespan.

In March 2008, the Jaguar E-Kind ranked very first in Everyday Telegraph list of the &quot100 most stunning cars&quot of all time.[2] In 2004, Sports Vehicle International magazine placed the E-Sort at number a single on their list of Leading Sports Cars of the 1960s.

Contents

1 Overview
two Idea versions
•• two.1 E1A (1957)
•• two.two E2A (1960)
three Production versions
•• three.1 Series 1 (1961-1968)
•• 3.2 Series two (1969-1971)
•• three.three Series three (1971-1975)
4 Limited edtions
•• 4.1 Low Drag Coupé (1962)
•• four.2 Lightweight E-Sort (1963-1964)
five Motor Sport
6 See also
7 References
8 External hyperlinks

Overview

The E-Variety was initially made and shown to the public as a grand tourer in two-seater coupé type (FHC or Fixed Head Coupé) and as convertible (OTS or Open Two Seater). The two+two version with a lengthened wheelbase was released many years later.

On its release Enzo Ferrari referred to as it &quotThe most beautiful automobile ever produced&quot.

The model was made in three distinct versions which are now usually referred to as &quotSeries 1&quot, &quotSeries two&quot and &quotSeries three&quot. A transitional series among Series 1 and Series 2 is identified unofficially as &quotSeries 1½&quot.

In addition, several limited-edition variants have been created:

• The &quot’Lightweight’ E-Variety&quot which was apparently intended as a sort of comply with-up to the D-Variety. Jaguar planned to generate 18 units but eventually only a dozen have been reportedly constructed. Of those, one particular is recognized to have been destroyed and two other people have been converted to coupé kind. These are exceedingly uncommon and sought soon after by collectors.
• The &quotLow Drag Coupé&quot was a a single-off technical physical exercise which was in the end sold to a Jaguar racing driver. It is presently believed to be element of the private collection of the existing Viscount Cowdray.

Concept versions

E1A (1957)

Following their good results at LeMans 24 hr via the 1950s Jaguars defunct racing department had been provided the brief to use D-Sort style building to create a road going sports vehicle, replacing the XK150.

It is suspected that the first prototype (E1A) was given the code based on: (E): The proposed production name E-Sort (1): First Prototype (A): Aluminium building (Production models employed steel bodies)

The automobile featured a monocoque design and style, Jaguar’s totally independent rear suspension and the properly proved &quotXK&quot engine.

The automobile was utilized solely for factory testings and was never ever formally released to the public. The automobile was ultimately scrapped by the factory

E2A (1960)

Jaguar’s second E-Sort notion was E2A which as opposed to E1A was constructed from a steel chassis and utilized a aluminium body. This auto was completed as a race auto as it was believed by Jaguar at the time it would supply a far better testing ground.

E2A utilized a three litre version of the XK engine with a Lucas fuel injection method.

Right after retiring from the LeMans 24 hr the auto was shipped to America to be employed for racing by Jaguar privateer Briggs Cunningham.

In 1961 the auto returned to Jaguar in England to be utilized as a testing mule.

Ownership of E2A passed to Roger Woodley (Jaguars buyer competition car manager) who took possession on the basis the auto not be utilized for racing. E2A had been scheduled to be scrapped.

Roger’s wife Penny Griffiths owned E2A till 2008 when it was presented for sale at Bonham’s Quail Auction. Sale value was US.five million

Production versions

Series 1 (1961-1968)

Series I

• Production
1961–1968[three] [four]

Body style(s)
two-door coupe
2-door 2+2 coupe
2-door convertible

Engine(s)
3.8 L XK I6
four.two L XK I6

Wheelbase
96. in (2438 mm) (FHC / OTS)
105. in (2667 mm) (2+2) [5]

• Length
175.3125 in (4453 mm) (FHC / OTS)
184.4375 in (4685 mm) (2+2) [five]

• Width
65.25 in (1657 mm) (all) [5]

• Height
48.125 in (1222 mm) (FHC)
50.125 in (1273 mm) (two+two)
46.5 in (1181 mm) (OTS)[5]

Curb weight
two,900 lb (1,315 kg) (FHC)
2,770 lb (1,256 kg) (OTS)
3,090 lb (1,402 kg) (two+2) [six]

• Fuel capacity
63.64 L (16.eight US gal 14. imp gal)[five]

The Series 1 was introduced, initially for export only, in March 1961. The domestic marketplace launch came four months later in July 1961.[7] The cars at this time used the triple SU carburetted three.8 litre six-cylinder Jaguar XK6 engine from the XK150S. The initial 500 cars constructed had flat floors and external hood (bonnet) latches. These vehicles are uncommon and a lot more valuable. After that, the floors were dished to offer much more leg space and the twin hood latches moved to inside the vehicle. The three.eight litre engine was elevated to four.two litres in October 1964.[7]

All E-Varieties featured independent coil spring rear suspension with torsion bar front ends, and four wheel disc brakes, in-board at the rear, all have been power-assisted. Jaguar was one of the 1st auto manufacturers to equip cars with disc brakes as regular from the XK150 in 1958. The Series 1 can be recognised by glass covered headlights (up to 1967), modest &quotmouth&quot opening at the front, signal lights and tail-lights above bumpers and exhaust ideas beneath the licence plate in the rear.

3.eight litre automobiles have leather-upholstered bucket seats, an aluminium-trimmed centre instrument panel and console (changed to vinyl and leather in 1963), and a Moss 4-speed gearbox that lacks synchromesh for 1st gear (&quotMoss box&quot). four.two litre automobiles have more comfy seats, enhanced brakes and electrical systems, and an all-synchromesh four-speed gearbox. four.two litre automobiles also have a badge on the boot proclaiming &quotJaguar four.2 Litre E-Type&quot (3.8 cars have a easy &quotJaguar&quot badge). Optional extras incorporated chrome spoked wheels and a detachable challenging leading for the OTS.

An original E-Sort challenging best is quite uncommon, and discovering 1 intact with all the chrome, not to mention original paint in decent situation, is rather challenging. For those who want a hardtop and aren’t fussy more than whether or not it is an original from Jaguar, many third parties have recreated the hardtop to almost exact specifications. The price ranges anywhere from double to triple the cost of a canvas/vinyl soft leading.

A two+2 version of the coupé was added in 1966. The two+two provided the selection of an automatic transmission. The physique is 9 in (229 mm) longer and the roof angles are distinct with a more vertical windscreen. The roadster remained a strict two-seater.

There was a transitional series of automobiles constructed in 1967-68, unofficially referred to as &quotSeries 1½&quot, which are externally comparable to Series 1 cars. Due to American stress the new characteristics have been open headlights, different switches, and some de-tuning (with a downgrade of twin Zenith-Stromberg carbs from the original triple SU carbs) for US models. Some Series 1½ vehicles also have twin cooling fans and adjustable seat backs. Series 2 features were steadily introduced into the Series 1, creating the unofficial Series 1½ cars, but constantly with the Series 1 physique style.

Less broadly identified, there was also appropriate at the finish of Series 1 production and prior to the transitional &quotSeries 1½&quot referred to above, a very modest quantity of Series 1 cars created with open headlights.[8] These are often referred to as &quotSeries 1¼&quot cars.[9] Production dates on these machines vary but in right hand drive type production has been verified as late as March 1968.[ten] It is thought that the low quantity of these vehicles created relative to the other Series make them amongst the rarest of all production E Types.

An open three.8 litre automobile, actually the very first such production auto to be completed, was tested by the British magazine The Motor in 1961 and had a leading speed of 149.1 mph (240. km/h) and could accelerate from -60 mph (97 km/h) in 7.1 seconds. A fuel consumption of 21.3 miles per imperial gallon (13.3 L/100 km 17.7 mpg-US) was recorded. The test car cost £2097 including taxes.[11]

Production numbers from Graham[12]:

• 15,490 3.8s
• 17,320 four.2s
• 10,930 2+2s

Production numbers from xkedata.com[13]: [omitted — Flickr doesn’t allow tables]

Series two (1969-1971)

Series II

• Production
1969–1971[three] [4]

Body style(s)
2-door coupe
2-door 2+2 coupe
two-door convertible

Engine(s)
4.two L XK I6

Curb weight
3,018 lb (1,369 kg) (FHC)
two,750 lb (1,247 kg) (OTS)
three,090 lb (1,402 kg) (2+two) [6]

Open headlights with out glass covers, a wrap-about rear bumper, re-positioned and bigger front indicators and taillights below the bumpers, much better cooling aided by an enlarged &quotmouth&quot and twin electric fans, and uprated brakes are hallmarks of Series 2 cars. De-tuned in US, but nevertheless with triple SUs in the UK, the engine is very easily identified visually by the adjust from smooth polished cam covers to a more industrial ‘ribbed’ look. Late Series 1½ automobiles also had ribbed cam covers. The interior and dashboard were also redesigned, with rocker switches that met U.S well being and safety regulations getting substituted for toggle switches. The dashboard switches also lost their symmetrical layout. New seats were fitted, which purists claim lacked the style of the originals but were certainly far more comfortable. Air conditioning and energy steering were accessible as factory possibilities.

Production according to Graham[12] is 13,490 of all sorts.

Series two production numbers from xkedata.com[13]: [omitted — Flickr doesn’t let tables]

Official delivery numbers by industry and year are listed in Porter[three] but no summary totals are provided.

Series 3 (1971-1975)

Series III

• Production
1971–1975

Physique style(s)
two-door 2+two coupe
two-door convertible

Engine(s)
five.3 L Jaguar V12

Wheelbase
105 in (2667 mm) (both)[six]

• Length
184.four in (4684 mm) (two+2)
184.5 in (4686 mm) (OTS)[6]

• Width
66. in (1676 mm) (two+2)
66.1 in (1679 mm) (OTS)[six]

• Height
48.9 in (1242 mm) (two+two)
48.1 in (1222 mm) (OTS)[6]

Curb weight
3,361 lb (1,525 kg) (2+2)
3,380 lb (1,533 kg) (OTS)[6]

• Fuel capacity
82 L (21.7 US gal 18. imp gal)[14]

A new 5.three L 12-cylinder Jaguar V12 engine was introduced, with uprated brakes and common power steering. The short wheelbase FHC body style was discontinued and the V12 was accessible only as a convertible and two+two coupé. The convertible utilized the longer-wheelbase two+two floorplan. It is very easily identifiable by the large cross-slatted front grille, flared wheel arches and a badge on the rear that proclaims it to be a V12. There were also a quite limited number of 4.two litre six-cylinder Series 3 E-Kinds constructed. These were featured in the initial sales literature. It is believed these are the rarest of all E-Types of any remaining.

In 2008 a British classic vehicle enthusiast assembled what is certainly the last ever E-Type from components bought from the finish-of-production surplus in 1974.[15]

Graham[12] lists production at 15,290.

Series 3 production numbers from xkedata.com[13]: [omitted — Flickr does not enable tables]

Restricted edtions

Two restricted production E-Sort variants have been produced as test beds, the Low Drag Coupe and Lightweight E-Variety, each of which have been raced:

Low Drag Coupé (1962)

Shortly soon after the introduction of the E-Sort, Jaguar management wanted to investigate the possibility of constructing a auto a lot more in the spirit of the D-Kind racer from which components of the E-Type’s styling and style had been derived. 1 vehicle was built to test the concept designed as a coupé as its monocoque design and style could only be created rigid enough for racing by using the &quotstressed skin&quot principle. Prior Jaguar racers were built as open-top vehicles due to the fact they had been based on ladder frame styles with independent chassis and bodies. Unlike the steel production E-Kinds the LDC used lightweight aluminium. Sayer retained the original tub with lighter outer panels riveted and glued to it. The front steel sub frame remained intact, the windshield was provided a much more pronounced slope and the rear hatch welded shut. Rear brake cooling ducts appeared subsequent to the rear windows,and the interior trim was discarded, with only insulation about the transmission tunnel. With the exception of the windscreen, all cockpit glass was plexi. A tuned version of Jaguar’s 3.eight litre engine with a wide angle cylinder-head design and style tested on the D-Sort racers was used. Air management became a significant problem and, even though significantly sexier looking and undoubtedly faster than a production E-Variety, the automobile was by no means competitive: the more quickly it went, the far more it wanted to do what its style dictated: take off.

The one particular and only test bed automobile was completed in summer season of 1962 but was sold a year later to Jaguar racing driver Dick Protheroe who raced it extensively and ultimately sold it. Considering that then it has passed by means of the hands of a number of collectors on each sides of the Atlantic and now is believed to reside in the private collection of the existing Viscount Cowdray.

Lightweight E-Sort (1963-1964)

In some ways, this was an evolution of the Low Drag Coupé. It made in depth use of aluminium alloy in the body panels and other components. Nevertheless, with at least 1 exception, it remained an open-leading car in the spirit of the D-Type to which this vehicle is a much more direct successor than the production E-Sort which is more of a GT than a sports automobile. The vehicles utilised a tuned version of the production three.eight litre Jaguar engine with 300 bhp (224 kW) output rather than the 265 bhp (198 kW) created by the &quotordinary&quot version. At least one particular car is recognized to have been fitted with fuel-injection.

The vehicles had been entered in various races but, as opposed to the C-Kind and D-Sort racing automobiles, they did not win at Le Mans or Sebring.

Motor Sport

Bob Jane won the 1963 Australian GT Championship at the wheel of an E-Kind.

The Jaguar E-Sort was really successful in SCCA Production sports auto racing with Group44 and Bob Tullius taking the B-Production championship with a Series-3 V12 racer in 1975. A couple of years later, Gran-Turismo Jaguar from Cleveland Ohio campaigned a four.two L 6 cylinder FHC racer in SCCA production series and in 1980, won the National Championship in the SCCA C-Production Class defeating a fully funded factory Nissan Z-car group with Paul Newman.

See also

Jaguar XK150 – predecessor to the E-Variety
Jaguar XJS – successor to the E-Sort
Jaguar XK8 – The E-Type’s existing and spiritual successor
Guyson E12 – a rebodied series III constructed by William Towns

References

^ Loughborough graduate and designer of E Kind Jaguar honoured
^ 100 most gorgeous vehicles
• ^ a b cPorter, Philip (2006). Jaguar E-variety, the definitive history. p. 443. ISBN -85429-580-1.
• ^ a b&quot’69 Series two Jaguar E Types&quot, Autocar, October 24, 1968
• ^ a b c d eThe Full Official Jaguar &quotE&quot. Cambridge: Robert Bentley. 1974. p. 12. ISBN -8376-0136-3.
• ^ a b c d e f g&quotJaguar E-Sort Specifications&quot. http://www.web-cars.com/e-sort/specifications.php. Retrieved 29 August 2009.
• ^ a b&quotBuying secondhand E-type Jaguar&quot. Autocar 141 (nbr4042): pages 50–52. 6 April 1974.
^ See Jaguar Clubs of North America concourse info at: [1] and more specifically the actual Series 1½ concourse guide at [two]
^ Ibid.
^ Examine proper hand drive VIN numbers given in JCNA concours guide referred to above with production dates for appropriate hand drive vehicles as reflected in the XKEdata database at [three]
^&quotThe Jaguar E-kind&quot. The Motor. March 22, 1961.
• ^ a b cRobson, Graham (2006). A–Z British Vehicles 1945–1980. Devon, UK: Herridge &amp Sons. ISBN -9541063-9-3.
• ^ a b chttp://www.xkedata.com/stats/. http://www.xkedata.com/stats/. Retrieved 29 August 2009.
^Every day Express Motor Show Assessment 1975 Automobiles: Page 24 (Jaguar E V12). October 1974.
^ jalopnik.com/5101872/british-man-cobbles-with each other-last-ja…

Imperial Performs, Menston

Image by tj.blackwell
G.L Murphy Machinery Ltd. was an industrial components manufacturer established in 1930. They had been primarily based in this mill, named Imperial Performs, on the rural outskirts of Menston in West Yorkshire. The business produced tools, belt driven machinery, transmissions and electrical equipment, specialising in products for tanners and leather companies in addition to glue and gelatine plants. They created batch runs of specialist components and carried out renovation function on a variety of machine components.

Imperial Works is primarily constructed from locally mined millstone grit and characteristics an desirable redbrick chimney. It covers a pretty expansive location amid rural farmland to the north of Menston, just off Otley Road. Some components of the site are nevertheless in use but this older section is now falling into fast decay. Most clues from items identified inside the G.L Murphy factory appear to date its closure to the 1970s.

Click here to view the rest of the image set for a tour inside the decaying old mill.