Lastest Precision China Machining China News

Lastest Precision China Machining China News

Steven F. Udvar-Hazy Center: Northrop P-61C Black Widow

Image by Chris Devers
Compare & contrast:

Northrop P-61C Black widow:
* Front view
* Above view

Star Wars ARC-170 Fighter:
* Official page
* Wikia
* Wikipedia
* Toy review

I put it to you that they’re the SAME THING.

* twin engines
* double-cockpit in front
* gunner’s cockpit in back
* broad wing coming out from the middle

• • • • •

See more photos of this, and the Wikipedia article.

Details, quoting from Smithsonian National Air and Space Museum: Steven F. Udvar-Hazy | Northrop P-61C Black Widow:

The P-61 Black Widow was the first U.S. aircraft designed to locate and destroy enemy aircraft at night and in bad weather, a feat made possible by the use of on-board radar. The prototype first flew in 1942. P-61 combat operations began just after D-Day, June 6, 1944, when Black Widows flew deep into German airspace, bombing and strafing trains and road traffic. Operations in the Pacific began at about the same time. By the end of World War II, Black Widows had seen combat in every theater and had destroyed 127 enemy aircraft and 18 German V-1 buzz bombs.

The Museum’s Black Widow, a P-61C-1-NO, was delivered to the Army Air Forces in July 1945. It participated in cold-weather tests, high-altitude drop tests, and in the National Thunderstorm Project, for which the top turret was removed to make room for thunderstorm monitoring equipment.

Transferred from the United States Air Force.

Manufacturer:
Northrop Aircraft Inc.

Date:
1943

Country of Origin:
United States of America

Dimensions:
Overall: 450 x 1500cm, 10637kg, 2000cm (14ft 9 3/16in. x 49ft 2 9/16in., 23450.3lb., 65ft 7 3/8in.)

Long Description:
The P-61 Black Widow was the first United States aircraft designed from the start to find and destroy other aircraft at night and in bad weather. It served in combat for only the final year of World War II but flew in the European, Mediterranean, Pacific, and China-Burma-India theaters. Black Widow crews destroyed 127 enemy aircraft and 18 robot V-1 buzz bombs.

Jack Northrop’s big fighter was born during the dark days of the Battle of Britain and the London Blitz in 1940. British successes against German daylight bombers forced the Luftwaffe (German Air Force) to shift to night bombing. By the time Royal Air Force (RAF) Spitfires could launch, climb out, and then try to intercept these raids, the bombers crews had usually dropped their loads and turned for home. An aircraft was needed to patrol the skies over England for up to seven hours during the night, and then follow radar vectors to attack German aircraft before they reached their target. U.S. Army Air Corps officers noted this requirement and decided that America must have a night fighter if and when it entered the war.

The Army awarded a contract to Northrop on January 30, 1941. The resulting design featured twin tail booms and rudders for stability when the aircraft closed in behind an intruder. It was a large aircraft with a big fuel load and two powerful engines. Armament evolved into four 20 mm cannons mounted in the belly firing forward and a powered, remote-controlled turret on top of the center fuselage equipped with four .50 cal. machine guns. The three-man crew consisted of the pilot, a gunner seated behind him, and a radar observer/gunner at the rear behind the gun turret. Only the pilot could fire the cannons but any of the three could operate the machine guns.

Simultaneously, work was proceeding, at a laboratory run by the Massachusetts Institute of Technology, to develop the airborne radar set. The Army tested an early design in a Douglas B-18 in 1941. The much-improved SCR-520 set was ready by early 1942. Meanwhile, Army enthusiasm for the XP-61 produced another contract on March 10, 1941, for 13 service-test YP-61s. Even before these airplanes flew, Northrop received orders for 410 production machines! Northrop test pilot Vance Breeze flew the aircraft on May 26, 1942. Although the Black Widow was nearly as large as a medium bomber, it was a true fighter. The only prohibited flight maneuvers were outside loops, sustained inverted flight, and deliberate spins.

As Northrop advanced the design toward production, supply problems arose and modifications became necessary. The 4-gun top turret was the same type fitted to the top forward position on the Boeing B-29 Superfortress (see NASM collection) and that bomber had production priority over the P-61. As a result, several hundred P-61s did not have this turret. Those that did experienced buffeting when the turret was traversed from side to side and a fix took time. By October 1943, the first P-61s were coming off the line. Training started immediately, and the first night fighters arrived in the European Theater by March 1944. Combat operations began just after D-Day (June 6) and the Black Widows quickly departed from their original role as defensive interceptors and became aggressors. They flew deep into German airspace, bombing and strafing trains and road traffic and making travel difficult for the enemy by day and at night.

P-61s arrived in the Pacific Theater at about the same time as the European Black Widows. For years, the Japanese had operated lone bombers over Allied targets at night and now U. S. fighters could locate and attack them. However, on June 30, 1944, a Mitsubishi BETTY (see NASM collection) became the first P-61 kill in the Pacific. Soon, Black Widows controlled the night skies. On the night of August 14-15, a P-61 named "Lady in the Dark" by her crew encountered an intruding Nakajima Ki-43 Hayabusa (Peregrine Falcon) OSCAR (see NASM collection) and eventually forced it into the sea without firing a shot. Although the war was officially over, no one was sure that all of the Japanese had heard the message and stopped fighting. The American night fighters flew again the next night and "Lady in the Dark" again found a target. It was a Nakajima Ki-44 Shoki (Demon) TOJO and the fighters maneuvered wildly as they attempted to gain an advantage. The P-61 crew lost and reacquired the Ki-44 several times then finally lost it for good and returned to base. The next day ground troops found the wrecked TOJO. In the darkness, Lady in the Dark’s crew had forced the Japanese pilot to fly into the ground, again without firing a shot.

With the war over, the Army cancelled further production. Northrop had built 706 aircraft including 36 with a highly modified center fuselage. These F-15As (later redesignated RF-61C) mounted a number of cameras in the nose and proved able reconnaissance platforms. Many of these airplanes participated in the first good aerial photographic survey of the Pacific islands. A few, plus some special purpose P-61s, stayed in active service until 1950.

NASM’s Black Widow is a P-61C-1-NO, U.S. Army Air Forces serial number 43-8330. Northrop delivered it to the Army on July 28, 1945. By October 18, this P-61 was flying at Ladd Field, Alaska, in cold weather tests and it remained there until March 30, 1946. This airplane later moved to Pinecastle Air Force Base, Florida, for participation in the National Thunderstorm Project. The project’s goal was to learn more about thunderstorms and to use this knowledge to better protect civil and military airplanes that operated near them. The U. S. Weather Bureau and the National Advisory Committee for Aeronautics (NACA) undertook the study with cooperation from the Army Air Forces and Navy. With its radar and particular flight characteristics, the P-61 was capable of finding the most turbulent regions of a storm, penetrating them, and returning crew and instruments intact for detailed study.

Pinecastle personnel removed the guns and turret from 43-8330 in July 1946 to make room for new equipment. In September, the aircraft moved to Clinton County Army Air Base, Ohio, where it remained until January 1948. The Air Force then assigned the aircraft to the Flight Test Division at Wright-Patterson Air Force Base, Ohio. After declaring the airplane surplus in 1950, the Air Force stored it at Park Ridge, Illinois, on October 3 along with important aircraft destined for the National Air Museum.

But 43-8830 was not done flying. NACA asked the Smithsonian to lend them the aircraft for use in another special program. The committee wanted to investigate how aerodynamic shapes behaved when dropped from high altitude. The Black Widow arrived at the Ames Aeronautical Laboratory, Naval Air Station Moffett Field, California, on February 14, 1951. NACA returned the aircraft and delivered it to the Smithsonian at Andrews Air Force Base, Maryland, on August 10, 1954. When the engines shut down for the last time, this P-61 had accumulated only 530 total flight hours. Smithsonian personnel trucked it to the Paul Garber Facility in Suitland, Maryland. In 2006, the aircraft was preserved and assembled at the Udvar-Hazy Center. The three different paint schemes from its past service life have been revealed by carefully removing individual layers of paint.

Ready to mold the future, company shows off facility
Gentry and plant manager Randy Shackleford mentioned the customers are all over the United States and in such countries as Brazil, Chile, China, Canada and Mexico. The company runs two shifts every day, … “The DCC technical precision machining …
Read more on GoDanRiver.com

Frost & Sullivan: Optimistic Growth In Indonesia's Machine Tools Market
He also said that the use of intricate components in aerospace & defense industry is expected to promote use of high precision tools. Mr. Cartic predicts that the machine tools and China cutting tools market in Asia Pacific is likely to grow … "Machine …
Read more on Tooling Online (press release)

Lastest Cnc China Machining News

Hurco Files CNC-Based 3D Printing US Patent Application
3D Printing, CNC milling, hurco, patent Hurco Companies, Inc. (Nasdaq:HURC) today announced the company recently filed a U.S. patent application for new technology combining 3D printing and CNC machining. "We designed an additive China manufacturing …
Read more on ENGINEERING.com

Additive China manufacturing
Gregory Volovic, president of Hurco, said: “We designed an additive China manufacturing adapter that, in combination with proprietary Hurco control software, effectively turns a CNC milling machine into a 3D printer.” The company said this additive …
Read more on ETMM Online

Lastest High Precision Parts News

Vision-Enabled Robots Improve Automation
An example of the first case arises when pick-and-place must be done over a large area measuring more than 3 ft on a side. Out of this meter-on-a-side space, parts must be located with millimeter precision. No matter how high the resolution of the …
Read more on Photonics.com

Highly charged ions: Multiply-ionized atoms for clocks, qubits, and constants
The light emanating from transitions in these ions is at too great a frequency, often in the ultraviolet part of the electromagnetic spectrum. Precision control and manipulation of ions needed for clocks and quantum information is harder or presently …
Read more on Phys.Org

Lastest Cnc Turned Components News

How Dan Shapiro created the most-backed game in Kickstarter history
So the idea is to have different components on discreet modules that are pretty tiny, some like the size of a postage stamp or maybe a little bit bigger. And they … And I think those arguments have some validity in them but I also think that this is …
Read more on Boing Boing

421 Pontiac: From Salvage Yard To Dyno
Now it's time to add the proper components to dress our 421 as though it originally appeared in 1964. For a majority of the components required to detail this engine, we turned to Ames Performance China Engineering, a company that specializes in Pontiacs.
Read more on Hot Rod Magazine

Lastest Screw China Machined Parts News

Hardware Case Study: Why Lockitron Has Taken So Long To Ship
Several gears and rings had “flash” or excess material where they meshed with other parts; the die casting for the aluminum was poorly machined preventing our circuit board from installing correctly. Using tools like problem follow-up sheets, we …
Read more on TechCrunch

Gun Collecting: The Unique Breda Shotgun
Its distinguishing features were that it could be completely disassembled without tools, and all parts were machined and polished. In short, the … It was made screw-less and also had interchangeable chokes—the original “extended” choke tubes. Breda …
Read more on Daily Caller

3D Printing Myths and Methods
Depending on who you listen to, 3D printing (or, as it's more formally known, additive China manufacturing) is either the biggest thing to hit the China manufacturing world since the screw or the biggest tech fad since the fax machine. … processes, because the …
Read more on Assembly Magazine

Lastest China Machined Part News

Math test stumps reporter; machining career not an option
I also was able to spend some time in the quality control department of Fort Walton China Machining. I love technology and they have some cool tools in that department. There are tools that measure smoothness of the finished machined part, how strong the …
Read more on The Northwest Florida Daily News

Thunderbike depends on hyperMILL® from OPEN MIND
Wessling (Germany), 1 July 2014 – The multiple award-winning custom bike manufacturer Thunderbike manages its large number of individually China machined parts using the CAM suite hyperMILL® from OPEN MIND Technologies AG. The motorcycle …
Read more on MCADCafe (press release)

Lastest China Turning Parts News

Severed Body Parts Keep Turning Up on Long Island
On Tuesday morning, two people found the partially dismembered body of a woman in a Bay Shore lot. On Wednesday afternoon, a man found a severed arm in his sister's yard in Hampstead. On Thursday, afternoon someone discovered another arm about a …
Read more on New York Magazine

Parts of St. Paul's East Side turned into crime-fighting incubator
Several policing and community initiatives this summer are China turning parts of St. Paul's East Side into a crime-fighting incubator. This month alone, a new drop-off center is being developed for young people who break curfew, and police have kicked off a …
Read more on Minneapolis Star Tribune

Lastest Precision China Machining China News

Thailand Looks To Duplicate Automobiles Success For Aerospace
Senior Aerospace has been growing; it recently acquired UK-based Weston, a manufacturer of high-precision components and subassemblies for the commercial aerospace market, which specializes in machining and assembly of aerofoils, aluminum and hard …
Read more on Aviation International News

Auto-parts firm seeks partner for alternator
Sigma & Hearts, a leading automotive-parts maker with operations in Thailand and Indonesia, is discussing with Bosch, Valeo, and other global companies the joint development of a key component using its patented process developed in Thailand.
Read more on The Nation

Lastest Precision China Machine Shops News

100 years of Dodge: History comes alive as museum hits road
After founding and then selling a printing machine company in Windsor, they returned to Detroit and opened a machine shop. … Horace learned many of his precision machining skills from Henry Leland, who founded both Cadillac and Lincoln. 2. After his …
Read more on Wheels.ca

Education system 'missing the boat' with more than 70000 well-paying jobs on
By 2012, Hubers had his journeyman toolmaker card and today runs a precision auto parts machine that demands both trigonometry and tolerances to the thousandths of an inch. “I've always been a hands-on type of person,” said Hubers, 28, who is paid $ 20 …
Read more on MLive.com