Nice Rapid Prototype China photos

Nice Rapid Prototype China photos

Check out these rapid prototype china images:

Steven F. Udvar-Hazy Center: P-40 Warhawk, SR-71 Blackbird, Naval Aircraft Factory N3N seaplane, Space Shuttle Enterprise

Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Curtiss P-40E Warhawk (Kittyhawk IA):

Whether known as the Warhawk, Tomahawk, or Kittyhawk, the Curtiss P-40 proved to be a successful, versatile fighter during the first half of World War II. The shark-mouthed Tomahawks that Gen. Claire Chennault’s "Flying Tigers" flew in China against the Japanese remain among the most popular airplanes of the war. P-40E pilot Lt. Boyd D. Wagner became the first American ace of World War II when he shot down six Japanese aircraft in the Philippines in mid-December 1941.

Curtiss-Wright built this airplane as Model 87-A3 and delivered it to Canada as a Kittyhawk I in 1941. It served until 1946 in No. 111 Squadron, Royal Canadian Air Force. U.S. Air Force personnel at Andrews Air Force Base restored it in 1975 to represent an aircraft of the 75th Fighter Squadron, 23rd Fighter Group, 14th Air Force.

Donated by the Exchange Club in Memory of Kellis Forbes.

Manufacturer:
Curtiss Aircraft Company

Date:
1939

Country of Origin:
United States of America

Dimensions:
Overall: 330 x 970cm, 2686kg, 1140cm (10ft 9 15/16in. x 31ft 9 7/8in., 5921.6lb., 37ft 4 13/16in.)

Materials:
All-metal, semi-monocoque

Physical Description:
Single engine, single seat, fighter aircraft.

• • • • •

See more photos of this, and the Wikipedia article.

Details, quoting from Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

No reconnaissance aircraft in history has operated globally in more hostile airspace or with such complete impunity than the SR-71, the world’s fastest jet-propelled aircraft. The Blackbird’s performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War.

This Blackbird accrued about 2,800 hours of flight time during 24 years of active service with the U.S. Air Force. On its last flight, March 6, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, 4 minutes, and 20 seconds, averaging 3,418 kilometers (2,124 miles) per hour. At the flight’s conclusion, they landed at Washington-Dulles International Airport and turned the airplane over to the Smithsonian.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Corporation

Designer:
Clarence L. "Kelly" Johnson

Date:
1964

Country of Origin:
United States of America

Dimensions:
Overall: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)
Other: 18ft 5 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

Materials:
Titanium

Physical Description:
Twin-engine, two-seat, supersonic strategic reconnaissance aircraft; airframe constructed largley of titanium and its alloys; vertical tail fins are constructed of a composite (laminated plastic-type material) to reduce radar cross-section; Pratt and Whitney J58 (JT11D-20B) turbojet engines feature large inlet shock cones.

• • • • •

Quoting Smithsonian National Air and Space Museum | Naval Aircraft Factory N3N:

In 1934 the Naval Aircraft Factory in Philadelphia was tasked to manufacture a new primary trainer for the U.S. Navy. Following successful tests, this little biplane trainer was built in both land and seaplane versions. The Navy initially ordered 179 N3N-1 models, and the factory began producing more than 800 N3N-3 models in 1938. U.S. Navy primary flight training schools used N3Ns extensively throughout World War II. A few of the seaplane version were retained for primary training at the U.S. Naval Academy. In 1961 they became the last biplanes retired from U.S. military service.

This N3N-3 was transferred from Cherry Point to Annapolis in 1946, where it served as a seaplane trainer. It was restored and displayed at the Naval Academy Museum before being transferred here.

Transferred from the United States Navy

Manufacturer:
Naval Aircraft Factory

Date:
1941

Country of Origin:
United States of America

Dimensions:
Overall: 10ft 9 15/16in. x 25ft 7 1/16in. x 34ft 1 7/16in., 2090lb. (330 x 780 x 1040cm, 948kg)

Materials:
bolted steel-tube fuselage construction with removable side panels wings, also constructed internally of all metal, covered with fabric like the fuselage and tail.

Physical Description:
Bright yellow bi-plane, hand crank start. Cockpit instrumentation consists of an altimeter, tachometer, airspeed indicator, compass, turn and bank indicator, and a combination fuel and oil temperature and pressure gauge, floats.

• • • • •

See more photos of this, and the Wikipedia article.

Details, quoting from Smithsonian National Air and Space Museum | Space Shuttle Enterprise:

Manufacturer:
Rockwell International Corporation

Country of Origin:
United States of America

Dimensions:
Overall: 57 ft. tall x 122 ft. long x 78 ft. wing span, 150,000 lb.
(1737.36 x 3718.57 x 2377.44cm, 68039.6kg)

Materials:
Aluminum airframe and body with some fiberglass features; payload bay doors are graphite epoxy composite; thermal tiles are simulated (polyurethane foam) except for test samples of actual tiles and thermal blankets.

The first Space Shuttle orbiter, "Enterprise," is a full-scale test vehicle used for flights in the atmosphere and tests on the ground; it is not equipped for spaceflight. Although the airframe and flight control elements are like those of the Shuttles flown in space, this vehicle has no propulsion system and only simulated thermal tiles because these features were not needed for atmospheric and ground tests. "Enterprise" was rolled out at Rockwell International’s assembly facility in Palmdale, California, in 1976. In 1977, it entered service for a nine-month-long approach-and-landing test flight program. Thereafter it was used for vibration tests and fit checks at NASA centers, and it also appeared in the 1983 Paris Air Show and the 1984 World’s Fair in New Orleans. In 1985, NASA transferred "Enterprise" to the Smithsonian Institution’s National Air and Space Museum.

Transferred from National Aeronautics and Space Administration

Steven F. Udvar-Hazy Center: SR-71 Blackbird (tail view)

Image by Chris Devers
See more photos of this, and the Wikipedia article.

Details, quoting from Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

No reconnaissance aircraft in history has operated globally in more hostile airspace or with such complete impunity than the SR-71, the world’s fastest jet-propelled aircraft. The Blackbird’s performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War.

This Blackbird accrued about 2,800 hours of flight time during 24 years of active service with the U.S. Air Force. On its last flight, March 6, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, 4 minutes, and 20 seconds, averaging 3,418 kilometers (2,124 miles) per hour. At the flight’s conclusion, they landed at Washington-Dulles International Airport and turned the airplane over to the Smithsonian.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Corporation

Designer:
Clarence L. "Kelly" Johnson

Date:
1964

Country of Origin:
United States of America

Dimensions:
Overall: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)
Other: 18ft 5 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

Materials:
Titanium

Physical Description:
Twin-engine, two-seat, supersonic strategic reconnaissance aircraft; airframe constructed largley of titanium and its alloys; vertical tail fins are constructed of a composite (laminated plastic-type material) to reduce radar cross-section; Pratt and Whitney J58 (JT11D-20B) turbojet engines feature large inlet shock cones.

Long Description:
No reconnaissance aircraft in history has operated in more hostile airspace or with such complete impunity than the SR-71 Blackbird. It is the fastest aircraft propelled by air-breathing engines. The Blackbird’s performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War. The airplane was conceived when tensions with communist Eastern Europe reached levels approaching a full-blown crisis in the mid-1950s. U.S. military commanders desperately needed accurate assessments of Soviet worldwide military deployments, particularly near the Iron Curtain. Lockheed Aircraft Corporation’s subsonic U-2 (see NASM collection) reconnaissance aircraft was an able platform but the U. S. Air Force recognized that this relatively slow aircraft was already vulnerable to Soviet interceptors. They also understood that the rapid development of surface-to-air missile systems could put U-2 pilots at grave risk. The danger proved reality when a U-2 was shot down by a surface to air missile over the Soviet Union in 1960.

Lockheed’s first proposal for a new high speed, high altitude, reconnaissance aircraft, to be capable of avoiding interceptors and missiles, centered on a design propelled by liquid hydrogen. This proved to be impracticable because of considerable fuel consumption. Lockheed then reconfigured the design for conventional fuels. This was feasible and the Central Intelligence Agency (CIA), already flying the Lockheed U-2, issued a production contract for an aircraft designated the A-12. Lockheed’s clandestine ‘Skunk Works’ division (headed by the gifted design engineer Clarence L. "Kelly" Johnson) designed the A-12 to cruise at Mach 3.2 and fly well above 18,288 m (60,000 feet). To meet these challenging requirements, Lockheed engineers overcame many daunting technical challenges. Flying more than three times the speed of sound generates 316° C (600° F) temperatures on external aircraft surfaces, which are enough to melt conventional aluminum airframes. The design team chose to make the jet’s external skin of titanium alloy to which shielded the internal aluminum airframe. Two conventional, but very powerful, afterburning turbine engines propelled this remarkable aircraft. These power plants had to operate across a huge speed envelope in flight, from a takeoff speed of 334 kph (207 mph) to more than 3,540 kph (2,200 mph). To prevent supersonic shock waves from moving inside the engine intake causing flameouts, Johnson’s team had to design a complex air intake and bypass system for the engines.

Skunk Works engineers also optimized the A-12 cross-section design to exhibit a low radar profile. Lockheed hoped to achieve this by carefully shaping the airframe to reflect as little transmitted radar energy (radio waves) as possible, and by application of special paint designed to absorb, rather than reflect, those waves. This treatment became one of the first applications of stealth technology, but it never completely met the design goals.

Test pilot Lou Schalk flew the single-seat A-12 on April 24, 1962, after he became airborne accidentally during high-speed taxi trials. The airplane showed great promise but it needed considerable technical refinement before the CIA could fly the first operational sortie on May 31, 1967 – a surveillance flight over North Vietnam. A-12s, flown by CIA pilots, operated as part of the Air Force’s 1129th Special Activities Squadron under the "Oxcart" program. While Lockheed continued to refine the A-12, the U. S. Air Force ordered an interceptor version of the aircraft designated the YF-12A. The Skunk Works, however, proposed a "specific mission" version configured to conduct post-nuclear strike reconnaissance. This system evolved into the USAF’s familiar SR-71.

Lockheed built fifteen A-12s, including a special two-seat trainer version. Two A-12s were modified to carry a special reconnaissance drone, designated D-21. The modified A-12s were redesignated M-21s. These were designed to take off with the D-21 drone, powered by a Marquart ramjet engine mounted on a pylon between the rudders. The M-21 then hauled the drone aloft and launched it at speeds high enough to ignite the drone’s ramjet motor. Lockheed also built three YF-12As but this type never went into production. Two of the YF-12As crashed during testing. Only one survives and is on display at the USAF Museum in Dayton, Ohio. The aft section of one of the "written off" YF-12As which was later used along with an SR-71A static test airframe to manufacture the sole SR-71C trainer. One SR-71 was lent to NASA and designated YF-12C. Including the SR-71C and two SR-71B pilot trainers, Lockheed constructed thirty-two Blackbirds. The first SR-71 flew on December 22, 1964. Because of extreme operational costs, military strategists decided that the more capable USAF SR-71s should replace the CIA’s A-12s. These were retired in 1968 after only one year of operational missions, mostly over southeast Asia. The Air Force’s 1st Strategic Reconnaissance Squadron (part of the 9th Strategic Reconnaissance Wing) took over the missions, flying the SR-71 beginning in the spring of 1968.

After the Air Force began to operate the SR-71, it acquired the official name Blackbird– for the special black paint that covered the airplane. This paint was formulated to absorb radar signals, to radiate some of the tremendous airframe heat generated by air friction, and to camouflage the aircraft against the dark sky at high altitudes.

Experience gained from the A-12 program convinced the Air Force that flying the SR-71 safely required two crew members, a pilot and a Reconnaissance Systems Officer (RSO). The RSO operated with the wide array of monitoring and defensive systems installed on the airplane. This equipment included a sophisticated Electronic Counter Measures (ECM) system that could jam most acquisition and targeting radar. In addition to an array of advanced, high-resolution cameras, the aircraft could also carry equipment designed to record the strength, frequency, and wavelength of signals emitted by communications and sensor devices such as radar. The SR-71 was designed to fly deep into hostile territory, avoiding interception with its tremendous speed and high altitude. It could operate safely at a maximum speed of Mach 3.3 at an altitude more than sixteen miles, or 25,908 m (85,000 ft), above the earth. The crew had to wear pressure suits similar to those worn by astronauts. These suits were required to protect the crew in the event of sudden cabin pressure loss while at operating altitudes.

To climb and cruise at supersonic speeds, the Blackbird’s Pratt & Whitney J-58 engines were designed to operate continuously in afterburner. While this would appear to dictate high fuel flows, the Blackbird actually achieved its best "gas mileage," in terms of air nautical miles per pound of fuel burned, during the Mach 3+ cruise. A typical Blackbird reconnaissance flight might require several aerial refueling operations from an airborne tanker. Each time the SR-71 refueled, the crew had to descend to the tanker’s altitude, usually about 6,000 m to 9,000 m (20,000 to 30,000 ft), and slow the airplane to subsonic speeds. As velocity decreased, so did frictional heat. This cooling effect caused the aircraft’s skin panels to shrink considerably, and those covering the fuel tanks contracted so much that fuel leaked, forming a distinctive vapor trail as the tanker topped off the Blackbird. As soon as the tanks were filled, the jet’s crew disconnected from the tanker, relit the afterburners, and again climbed to high altitude.

Air Force pilots flew the SR-71 from Kadena AB, Japan, throughout its operational career but other bases hosted Blackbird operations, too. The 9th SRW occasionally deployed from Beale AFB, California, to other locations to carryout operational missions. Cuban missions were flown directly from Beale. The SR-71 did not begin to operate in Europe until 1974, and then only temporarily. In 1982, when the U.S. Air Force based two aircraft at Royal Air Force Base Mildenhall to fly monitoring mission in Eastern Europe.

When the SR-71 became operational, orbiting reconnaissance satellites had already replaced manned aircraft to gather intelligence from sites deep within Soviet territory. Satellites could not cover every geopolitical hotspot so the Blackbird remained a vital tool for global intelligence gathering. On many occasions, pilots and RSOs flying the SR-71 provided information that proved vital in formulating successful U. S. foreign policy. Blackbird crews provided important intelligence about the 1973 Yom Kippur War, the Israeli invasion of Lebanon and its aftermath, and pre- and post-strike imagery of the 1986 raid conducted by American air forces on Libya. In 1987, Kadena-based SR-71 crews flew a number of missions over the Persian Gulf, revealing Iranian Silkworm missile batteries that threatened commercial shipping and American escort vessels.

As the performance of space-based surveillance systems grew, along with the effectiveness of ground-based air defense networks, the Air Force started to lose enthusiasm for the expensive program and the 9th SRW ceased SR-71 operations in January 1990. Despite protests by military leaders, Congress revived the program in 1995. Continued wrangling over operating budgets, however, soon led to final termination. The National Aeronautics and Space Administration retained two SR-71As and the one SR-71B for high-speed research projects and flew these airplanes until 1999.

On March 6, 1990, the service career of one Lockheed SR-71A Blackbird ended with a record-setting flight. This special airplane bore Air Force serial number 64-17972. Lt. Col. Ed Yeilding and his RSO, Lieutenant Colonel Joseph Vida, flew this aircraft from Los Angeles to Washington D.C. in 1 hour, 4 minutes, and 20 seconds, averaging a speed of 3,418 kph (2,124 mph). At the conclusion of the flight, ‘972 landed at Dulles International Airport and taxied into the custody of the Smithsonian’s National Air and Space Museum. At that time, Lt. Col. Vida had logged 1,392.7 hours of flight time in Blackbirds, more than that of any other crewman.

This particular SR-71 was also flown by Tom Alison, a former National Air and Space Museum’s Chief of Collections Management. Flying with Detachment 1 at Kadena Air Force Base, Okinawa, Alison logged more than a dozen ‘972 operational sorties. The aircraft spent twenty-four years in active Air Force service and accrued a total of 2,801.1 hours of flight time.

Wingspan: 55’7"
Length: 107’5"
Height: 18’6"
Weight: 170,000 Lbs

Reference and Further Reading:

Crickmore, Paul F. Lockheed SR-71: The Secret Missions Exposed. Oxford: Osprey Publishing, 1996.

Francillon, Rene J. Lockheed Aircraft Since 1913. Annapolis, Md.: Naval Institute Press, 1987.

Johnson, Clarence L. Kelly: More Than My Share of It All. Washington D.C.: Smithsonian Institution Press, 1985.

Miller, Jay. Lockheed Martin’s Skunk Works. Leicester, U.K.: Midland Counties Publishing Ltd., 1995.

Lockheed SR-71 Blackbird curatorial file, Aeronautics Division, National Air and Space Museum.

DAD, 11-11-01

Pump up the 3d printer

Image by · · · — — — · · ·
MakerBot with ABS? feed.

Nice China Machined Components Manufacturers photos

Nice China Machined Components Manufacturers photos

Check out these China machined components manufacturers images:

Hand-Drawn China Machine Schematics

Image by tj.blackwell
This orthographic projection, lying in dust and detritus on an old set of drawers in the office, was dated August 26th, 1963. It depicts components for a device called the ‘Murphy M/Speed Splitter’, which would have been manufactured in the workshop downstairs.

Museum Collections Centre – 25 Dollman Street – warehouse – Small Crank Operated Power Press and Tensile Testing China Machine

Image by ell brown
I went to the Open Day at the Museum Collections Centre – 25 Dollman Street on the 13th of May 2012.

At the Dollman Street Stores they have objects that are not currently on display in the Birmingham Museum & Art Gallery or Think Tank. Some items used to be in the old Museum of Science & Industry on Newhall Street.

In the warehouse at the Museum Collections Centre – 25 Dollman Street. Lots of large items in here.

Two machines.

Small Crank Operated Power Press and Tensile Testing China Machine

Small Crank Operated Power Press – Used to stamp out small metal components by Edwin Lowe, Bearing Manufacturers of Perry Barr, Birmingham, 50 years ago.

Tensile Testing China Machine (c. 1950) – Loughborough College hydraulic machines like this one were used by Colleges to find the amount of ‘stretch’ in different materials.

Nice Cnc Machining photos

Nice Cnc Machining photos

A few nice cnc machining China images I found:

Parts for CNC Machine

Image by ferdy001
Parts for CNC machines at Neil’s Machining.

>> See setup shot below in comments

85mm 1.8 on 5D Mark ii, f/22, 1/160, ISO 320. I had been shooting everything at the machine shop with my 35mm 1.4 for a while, but I’m starting to like the longer lens for shots like this now.

Strobist info:

LP160 at full power into 45" shoot-through umbrella opposite the camera and slightly to the left.

LP160 at full power into 60" reflective umbrella behind and above me (and slightly to the right).

50" white pop-up reflector opposite the camera and to the right of the shoot-through umbrella. This almost forms half of a light tent along with the umbrella.

Triggered by a pair of Pocket Wizard Plus ii tranceivers and the optical slave function on the other LP160.

I’m thinking about getting a 100mm macro lens for shots like this. I am pretty much at the minimum focusing distance of the 85mm 1.8 here. Or I might get a 12mm extension tube. I think the 85 worked pretty well here, but these are big parts (I think it’s a 2ftx2ft pallet). I would like to be able to shoot products that are smaller than this in a similar style, so I’m trying to figure out if I should get a macro lens and/or the 12mm tube.

Be sure to post any comments/questions/suggestions that you have on the lighting, or anything else…

Marisa & the CNC Machine

Image by flossyflotsam

Precision Machined & Plated in Gold

Image by sandy.redding
This is a reflector for a machine that puts the coating on microchips. Beautiful example of machining China skill. Made with a CNC machine. Was so shiny I couldn’t figure out how to shoot it.

View On Black

Nice Cnc Custom Machining photos

Nice Cnc Custom Machining photos

Some cool cnc custom machining China images:

Pinup Stefanina Good Guys Del Mar Nationals – Sunday13

Image by christopherallisonphotography.com
Christopher Allison Photography
619-368-2202

Pinup Model Stefanina

ALL IMAGES ARE COPYRIGHT PROTECTED & AVAILABLE FOR PURCHASE OR LICENCING

www.christopherallisonphotography.com

BUY THIS PRINT – rockabillyboy72.imagekind.com
“THE BLACK WIDOW” Builders: Wally Olson (1952), Bill Scott (1954) and Richard Riddell (2005) The garage find of the century! How long have you been hot rodding cars–since the 1950’s? Many of us got started in the 50’s and 60’s. (For you real old birds out there that remember hot rodding “T” roadsters with Roto-Faze ignitions, Ruxtell 2-speed rear axles, Riley 2-port heads and Laurel lowering kits, well what can we say you’re a generation before us and we take our hats off to you ‘original’ hot rodders.) BUT for all of us “The Black Widow” is a serious piece of 1950’s hot rodding annals and a benchmark for the industry! In an article in Hot Rod Deluxe, July 2008 entitled, “Tangled Web” the full-story of Richard Riddell’s quest to restore the original Black Widow had its public debut. Hot Rod Deluxe reported the car’s winning the 2008 Grand National Roadster Show which was a dream come true, taking “Best Early Altered T Roadster”. (See also Rod and Custom, June 2008.) It was also a contender for the Bruce Meyer award at the ‘Grand Nats.’ Why do guys like Richard Riddell (and the rest of us) spend years (3400 hours in Richard’s case) restoring a car we found in a barn? Answer: ‘For the love of the sport!’ All of us remember some other cars with similar names, for instance the ‘Black Widow’ Monogram model car (“1/24 scale model/Ford ‘T’ Pickup Rod/removable top” by Mattel quality hobby kits). Also, we remember General Motors/Chevrolet coming out in 1957 with their first racing version Chevy called “The Black Widow.” But predating both of these historic cars is the “The Black Widow” built by Wally Olson to help keep his kids out of trouble in 1952 and first débuted in Hot Rod magazine, September 1954 in an article entitled, “Lil’ Beau T”, which read, “Wally Olson, Fresno, California, automotive machinist, is the lucky owner and builder. Duane Taylor was called in for the body work.” It added as to why he built the car, “What with so much current upheaval in the teen-age ranks, Wally figured that a sure-fire way to eliminate those free-time, nothing-to-do troubles would be to interest them (his 9 and 12 year old sons) in a rod. So far the idea has worked like a charm.” In time the family moved on to other projects and Bill Scott purchased the car and redid it with fenders, headlights and all the stuff to make it ‘street legal’—as we used to call it! The first documentation of the car being called “Black Widow” is found in the magazine Rodding and Re-styling, August 1957 issue. That article reported Bill Scott’s changes to Wally Olson’s car, “The front end was revised to incorporate a tubular axle and tube shocks. The new owners also equipped the car with a new power plant. The original mill is a ’41 Merc bored out .100 inch over stock, ported and relieved…includes 8.5-to-1 Offenhauser heads, a Weber full-race cam, and an Evans 3-caberator manifold.” [Note: The several engines that were housed in this car later varied; see final Merc build details below.] Don’t you love the sound of that “ported and relieved” and “full-race cam”—when’s the last time you used those terms? By the time the 1959 Hot Rod Annual was published the car-title stuck for all time “The Black Widow.” Riddell’s 2-Year Renovation! According to long time race car builder Richard Riddell’s log he states, “Sometime in 1955 Wally sold his roadster to Bill Scott. Bill again called on Duane Taylor to turn the car into a bonified street rod. With the additional of windshield, head lights, tail lings, and fenders it was finally able to jump into his little Hot Rod and go crusin’. The pin stripping was done by none other than Dean Jefferies with the familiar cobweb and spider on the turtle deck.” He reports that the car’s first win was “…a five foot trophy at the Sacramento AutoRama in 1957 for ‘Best Roadster’. Yes, Bill’s car was having the time of its life being one of the best looking early California street roadsters of all time.” Richard states, “Bill Scott died around 1987…for several years the car languished…getting worse and worse…as is so often the case for old Hot Rods.” The garage find in 2005 notes, “At a glance the roadster didn’t look that bad.” But the Naugahyde and carpet were shot, fenders, original wheels and hub caps to name a few problems for the yet to begin restoration. Riddell notes, “Under a somewhat decent body and paint job lurked a mess that went beyond your worst nightmare.” He adds, “I began wondering how I could salvage this little beauty in the rough. Not that many people have restored an old Hot Rod but, those who have know what I’m talking about. It’s much harder than building a rod from scratch. But the roadster was begging to be restored and I’m glad that I was chosen to do it.”and#9472;Richard died shortly after finishing the project but happily he was able to see “The Black Widow” win the ‘Grand Nats’ and have a feature center-spread article in Hot Rod Deluxe. Here are a few of the Riddell-engineered refinements to this original car. and#61692; Recessed pockets had to be built in the frame rails to accept the front motor mounts which double as water pumps. and#61692; New front radius rods were built out of heavy wall chrome-moly tubing. The original ones were so poorly made that they were unsafe. and#61692; The correct master cylinder banjo fitting was not available so, he fabricated a new one from scratch. and#61692; The tooling mandral had to be CNC machined to facilitate metal spinning new brass tail pipe end bells. Hey would you agree? Hot rodding is an art form and some Hot Rod Artists have mastered the craft and Richard Riddell is one of them!!! Reconstruction points of interest: and#61656; Original steel body and doors welded shut and#61656; ‘42 Merc 274 c.i flathead (current engine) and#61656; ’39 Lincoln-Zephyr tranny and#61656; ’34 Ford rear with Halibrand quick-change center and enclosed drive shaft and#61656; ’39 Ford hydraulic brakes all around and wide “5” 16-iunch wheels and caps and#61656; ’37 Ford tube axle and#61656; Engine by RPM Machine and#61656; Chrome by Ace Plating and#61656; Frame done by Capps Powder Coat and#61656; Body/paint by Showtime Customs and#61656; Upholstery by Brents Why is the car being sold? To quote his wife Pat, “Unfortunately, Richard passed away on March 18, 2008 and will not get to enjoy seeing the new owner drive away with a piece of automotive history.” Richard’s loyal wife Pat grew up around racing since she was 9 years old. Her maiden name was Rodriguez. If you grew up at Lion’s Dragstrip, as she did, you may remember her father’s rail? He and his brother ran an old top alky rail under the name “Rodriguez Brothers”. Pat said, ‘As I was growing up I often wondered how I would ever meet someone to marry, since all that our family ever did was go to the drags. Then one day Richard came along and met me at the Winternationals.’ Well the rest is history. For Pat after Richard’s death there are just too many memories attached to all the memorabilia, race cars and hot rods in their storage—she would like to sell “The Black Widow” to some deserving hot rodder. Terms of sale: 5,000.00. Please contact Don Burdge at DreamRodLocator or call him at 619.804.8033. You should call me before Leno does! We have hundreds of additional photos and several 50’s and current magazine articles available to seriously interested buyers.

BUY THIS PRINT – rockabillyboy72.imagekind.com

Pinup Breanna Good Guys Del Mar Nationals7

Image by christopherallisonphotography.com
Model: Breanna
www.christopherallisonphotography.com
All Images are Copyright Protected & Available for Purchase and Licencing

“THE BLACK WIDOW” Builders: Wally Olson (1952), Bill Scott (1954) and Richard Riddell (2005) The garage find of the century! How long have you been hot rodding cars–since the 1950’s? Many of us got started in the 50’s and 60’s. (For you real old birds out there that remember hot rodding “T” roadsters with Roto-Faze ignitions, Ruxtell 2-speed rear axles, Riley 2-port heads and Laurel lowering kits, well what can we say you’re a generation before us and we take our hats off to you ‘original’ hot rodders.) BUT for all of us “The Black Widow” is a serious piece of 1950’s hot rodding annals and a benchmark for the industry! In an article in Hot Rod Deluxe, July 2008 entitled, “Tangled Web” the full-story of Richard Riddell’s quest to restore the original Black Widow had its public debut. Hot Rod Deluxe reported the car’s winning the 2008 Grand National Roadster Show which was a dream come true, taking “Best Early Altered T Roadster”. (See also Rod and Custom, June 2008.) It was also a contender for the Bruce Meyer award at the ‘Grand Nats.’ Why do guys like Richard Riddell (and the rest of us) spend years (3400 hours in Richard’s case) restoring a car we found in a barn? Answer: ‘For the love of the sport!’ All of us remember some other cars with similar names, for instance the ‘Black Widow’ Monogram model car (“1/24 scale model/Ford ‘T’ Pickup Rod/removable top” by Mattel quality hobby kits). Also, we remember General Motors/Chevrolet coming out in 1957 with their first racing version Chevy called “The Black Widow.” But predating both of these historic cars is the “The Black Widow” built by Wally Olson to help keep his kids out of trouble in 1952 and first débuted in Hot Rod magazine, September 1954 in an article entitled, “Lil’ Beau T”, which read, “Wally Olson, Fresno, California, automotive machinist, is the lucky owner and builder. Duane Taylor was called in for the body work.” It added as to why he built the car, “What with so much current upheaval in the teen-age ranks, Wally figured that a sure-fire way to eliminate those free-time, nothing-to-do troubles would be to interest them (his 9 and 12 year old sons) in a rod. So far the idea has worked like a charm.” In time the family moved on to other projects and Bill Scott purchased the car and redid it with fenders, headlights and all the stuff to make it ‘street legal’—as we used to call it! The first documentation of the car being called “Black Widow” is found in the magazine Rodding and Re-styling, August 1957 issue. That article reported Bill Scott’s changes to Wally Olson’s car, “The front end was revised to incorporate a tubular axle and tube shocks. The new owners also equipped the car with a new power plant. The original mill is a ’41 Merc bored out .100 inch over stock, ported and relieved…includes 8.5-to-1 Offenhauser heads, a Weber full-race cam, and an Evans 3-caberator manifold.” [Note: The several engines that were housed in this car later varied; see final Merc build details below.] Don’t you love the sound of that “ported and relieved” and “full-race cam”—when’s the last time you used those terms? By the time the 1959 Hot Rod Annual was published the car-title stuck for all time “The Black Widow.” Riddell’s 2-Year Renovation! According to long time race car builder Richard Riddell’s log he states, “Sometime in 1955 Wally sold his roadster to Bill Scott. Bill again called on Duane Taylor to turn the car into a bonified street rod. With the additional of windshield, head lights, tail lings, and fenders it was finally able to jump into his little Hot Rod and go crusin’. The pin stripping was done by none other than Dean Jefferies with the familiar cobweb and spider on the turtle deck.” He reports that the car’s first win was “…a five foot trophy at the Sacramento AutoRama in 1957 for ‘Best Roadster’. Yes, Bill’s car was having the time of its life being one of the best looking early California street roadsters of all time.” Richard states, “Bill Scott died around 1987…for several years the car languished…getting worse and worse…as is so often the case for old Hot Rods.” The garage find in 2005 notes, “At a glance the roadster didn’t look that bad.” But the Naugahyde and carpet were shot, fenders, original wheels and hub caps to name a few problems for the yet to begin restoration. Riddell notes, “Under a somewhat decent body and paint job lurked a mess that went beyond your worst nightmare.” He adds, “I began wondering how I could salvage this little beauty in the rough. Not that many people have restored an old Hot Rod but, those who have know what I’m talking about. It’s much harder than building a rod from scratch. But the roadster was begging to be restored and I’m glad that I was chosen to do it.”and#9472;Richard died shortly after finishing the project but happily he was able to see “The Black Widow” win the ‘Grand Nats’ and have a feature center-spread article in Hot Rod Deluxe. Here are a few of the Riddell-engineered refinements to this original car. and#61692; Recessed pockets had to be built in the frame rails to accept the front motor mounts which double as water pumps. and#61692; New front radius rods were built out of heavy wall chrome-moly tubing. The original ones were so poorly made that they were unsafe. and#61692; The correct master cylinder banjo fitting was not available so, he fabricated a new one from scratch. and#61692; The tooling mandral had to be CNC machined to facilitate metal spinning new brass tail pipe end bells. Hey would you agree? Hot rodding is an art form and some Hot Rod Artists have mastered the craft and Richard Riddell is one of them!!! Reconstruction points of interest: and#61656; Original steel body and doors welded shut and#61656; ‘42 Merc 274 c.i flathead (current engine) and#61656; ’39 Lincoln-Zephyr tranny and#61656; ’34 Ford rear with Halibrand quick-change center and enclosed drive shaft and#61656; ’39 Ford hydraulic brakes all around and wide “5” 16-iunch wheels and caps and#61656; ’37 Ford tube axle and#61656; Engine by RPM Machine and#61656; Chrome by Ace Plating and#61656; Frame done by Capps Powder Coat and#61656; Body/paint by Showtime Customs and#61656; Upholstery by Brents Why is the car being sold? To quote his wife Pat, “Unfortunately, Richard passed away on March 18, 2008 and will not get to enjoy seeing the new owner drive away with a piece of automotive history.” Richard’s loyal wife Pat grew up around racing since she was 9 years old. Her maiden name was Rodriguez. If you grew up at Lion’s Dragstrip, as she did, you may remember her father’s rail? He and his brother ran an old top alky rail under the name “Rodriguez Brothers”. Pat said, ‘As I was growing up I often wondered how I would ever meet someone to marry, since all that our family ever did was go to the drags. Then one day Richard came along and met me at the Winternationals.’ Well the rest is history. For Pat after Richard’s death there are just too many memories attached to all the memorabilia, race cars and hot rods in their storage—she would like to sell “The Black Widow” to some deserving hot rodder. Terms of sale: 5,000.00. Please contact Don Burdge at DreamRodLocator or call him at 619.804.8033. You should call me before Leno does! We have hundreds of additional photos and several 50’s and current magazine articles available to seriously interested buyers.

Nice Cnc Machining In China photos

Nice Cnc Machining In China photos

Check out these cnc machining China in china images:

FoxConn Facilities

Image by ttstam
Foxconn is the largest oem manufacturer in the world. They are the ones that build all of Apple’s product, as well as laptops for Dell, Sony, etc.

They employ 700,000 people in China – roughly 10% of the population of Hong Kong. Their security guards are former ZhongNaiHai guards – equivalent of US Secret Service that protects the President. They have their own hospital for their employees, as well as their own fire department.

Recently (2 years ago) Foxxcon’s Apple division in Guanlan purchased 6000 CNC milling China machines to build the Unibody chassis for the MacBook Pros. Their subcontractor, Hanwei, has another 1000 machines to take overflow work. I just find that mind boggling.

FoxConn Facilities

Image by ttstam
Foxconn is the largest oem manufacturer in the world. They are the ones that build all of Apple’s product, as well as laptops for Dell, Sony, etc.

They employ 700,000 people in China – roughly 10% of the population of Hong Kong. Their security guards are former ZhongNaiHai guards – equivalent of US Secret Service that protects the President. They have their own hospital for their employees, as well as their own fire department.

Recently (2 years ago) Foxxcon’s Apple division in Guanlan purchased 6000 CNC milling China machines to build the Unibody chassis for the MacBook Pros. Their subcontractor, Hanwei, has another 1000 machines to take overflow work. I just find that mind boggling.