Cool Precision Grinding And Manufacturing photos

Cool Precision Grinding And Manufacturing photos

Some cool precision grinding and manufacturing images:

Steven F. Udvar-Hazy Center: Boeing B-29 Superfortress “Enola Gay” (front starboard view), with Grumman F6F-three Hellcat at back-appropriate, amongst other individuals

Image by Chris Devers
See far more photos of this, and the Wikipedia article.

Information, quoting from Smithsonian National Air and Space Museum: Steven F. Udvar-Hazy | Boeing B-29 Superfortress &quotEnola Gay&quot:

Boeing’s B-29 Superfortress was the most sophisticated propeller-driven bomber of Planet War II and the 1st bomber to house its crew in pressurized compartments. Despite the fact that designed to fight in the European theater, the B-29 identified its niche on the other side of the globe. In the Pacific, B-29s delivered a variety of aerial weapons: conventional bombs, incendiary bombs, mines, and two nuclear weapons.

On August six, 1945, this Martin-built B-29-45-MO dropped the first atomic weapon used in combat on Hiroshima, Japan. Three days later, Bockscar (on show at the U.S. Air Force Museum near Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance climate reconnaissance aircraft that day. A third B-29, The Wonderful Artiste, flew as an observation aircraft on both missions.

Transferred from the United States Air Force.

Manufacturer:
Boeing Aircraft Co.
Martin Co., Omaha, Nebr.

Date:
1945

Nation of Origin:
United States of America

Dimensions:
All round: 900 x 3020cm, 32580kg, 4300cm (29ft six five/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)

Materials:
Polished general aluminum finish

Physical Description:
4-engine heavy bomber with semi-monoqoque fuselage and high-aspect ratio wings. Polished aluminum finish all round, regular late-World War II Army Air Forces insignia on wings and aft fuselage and serial quantity on vertical fin 509th Composite Group markings painted in black &quotEnola Gay&quot in black, block letters on lower left nose.

• • • • •

Quoting Smithsonian National Air and Space Museum | Grumman F6F-three Hellcat:

The Grumman F6F Hellcat was initially conceived as an advanced version of the U.S. Navy’s then current front-line fighter, the F4F Wildcat (see NASM collection). The Wildcat’s intended replacement, the Vought F4U Corsair (see NASM collection), first flown in 1940, was showing wonderful promise, but development was slowed by issues, such as the crash of the prototype.

The National Air and Space Museum’s F6F-three Hellcat, BuNo. 41834, was constructed at Grumman’s Bethpage, New York, factory in February 1944 beneath contract NOA-(S)846. It was delivered to the Navy on February 7, and arrived in San Diego, California, on the 18th. It was assigned to Fighter Squadron 15 (VF-15) on USS Hornet (CV12) bound for Hawaii. On arrival, it was assigned to VF-3 where it sustained damage in a wheels-up landing at NAS Barbers Point, Hawaii. Following repair, it was assigned to VF-83 exactly where it was used in a education role till February 21, 1945. Right after numerous transfers 41834 was converted to an F6F-3K target drone with the installation of sophisticated radio-control equipment. It was painted red with a pink tail that carried the number 14. Its mission was to be utilized in Operation Crossroads – the atomic bomb tests at Bikini Atoll. It flew on June 24, 1946, with a pilot, on a practice flight and was launched, unmanned, soon right after the very first bomb test. Instrumentation on board and photographic plates taped to the handle stick obtained information on radioactivity. Three more manned flights preceded the final unmanned flight on July 25, 1946, which evaluated the very first underwater explosion. Records indicate that exposure of this aircraft to the radioactive cloud was minimal and residual radiation is negligible.

F6F-3K 41834 was transferred to NAS Norfolk and logged its last flight on March 25, 1947, with a total of 430.2 flying hours. It was assigned to the National Air Museum on November three, 1948, and remained at Norfolk till October four, 1960, when it was moved by barge to Washington and placed in storage. In 1976 this Hellcat was loaned to the USS Yorktown Museum at Charleston, South Carolina. A superficial restoration was performed at the museum, but due to the fact of the harsh environment and its poor situation the Hellcat was returned to NASM on March 16, 1982. In 1983, it was sent to Grumman Aerospace exactly where a team of volunteers fully restored the aircraft. In 1985, it was shipped back to the Paul E. Garber Preservation, Restoration and Storage Facility in Suitland, Maryland, and put in storage. NASM’s F6F-three Hellcat is scheduled to be displayed in the new Steven F. Udvar-Hazy center at Dulles International Airport in Virginia in 2004.

Transferred from the United States Navy.

Manufacturer:
Grumman Aircraft Engineering Corporation

Date:
1943

Nation of Origin:
United States of America

Dimensions:
General: 338 x 1021cm, 4092kg, 1304cm (11ft 1 1/16in. x 33ft 5 15/16in., 9021.2lb., 42ft 9 3/8in.)

Physical Description:
Heavy armor plate, reinforced empennage, R-2800-10W engine, spring tabs on the ailerons (increased maneuverability), could carry rockets as properly as bombs.

Good Internal Grinding photos

Good Internal Grinding photos

Check out these internal grinding images:

Venice – Man’s Ambition Had No Ceiling in the Doge’s Palace!

Image by antonychammond
Discover #320 March 1st

The Doge’s Palace (Italian: Palazzo Ducale) is a gothic palace, and one of the main landmarks of the city of Venice, northern Italy. The palace was the residence of the Doge of Venice, the supreme authority of the Republic of Venice, opening as a museum in 1923. Today it is one particular of the 11 museums of the Fondazione Musei Civici di Venezia method. In 2010 it was visited by 1.358.186 individuals.
In 810, Doge Angelo Partecipazio moved the seat of government from the island of Malamocco to the region of the present-day Rialto, when it was decided a palatium duci, a ducal palace, should be built. Nevertheless, no traces remains of that 9th century constructing as the palace was partially destroyed in the 10th century by a fire. The following reconstruction operates were undertaken at the behest of Doge Sebastiano Ziani (1172-1178). A excellent reformer, he would drastically change the complete layout of the St. Mark’s Square. The new palace was built out of fortresses, 1 façade to the Piazzeta, the other overlooking the St. Mark’s Basin.

Even though only handful of traces remain of that palace, some Byzantine-Venetian architecture traits can still be observed at the ground floor, with the wall base in Istrian stone and some herring-bone-pattern brick paving. Political alterations in the mid-13th century led to the require to re-think the palace’s structure due to the considerable boost in the quantity of the Great Council’s members. The new Gothic palace’s constructions started around 1340, focusing moslty on the side of the developing facing the lagoon. Only in 1424, did Doge Francesco Foscari make a decision to extend the rebuilding works to the wing overlooking the Piazzetta, serving as law-courts, and with a ground floor arcade on the outdoors, open first floor loggias operating along the façade, and the internal courtyard side of the wing, completed with the building of the Porta della Carta (1442). In 1483, a violent fire broke out in the side of the palace overlooking the canal, exactly where the Doge’s Apartments have been. Once again, an crucial reconstruction became needed and was comissioned from Antonio Rizzo, who would introduce the new Renaissance language to the building’s architecture.

An complete new structure was raised alongside the canal, stretching from the ponte della Canonica to the Ponte della Paglia, with the official rooms of the government decorated with works comissioned from Vittore Carpaccio, Giorgione, Alvise Vivarini and Giovanni Bellini. Yet another large fire in 1547 destroyed some of the rooms on the second floor, but thankfully with no undermining the structure as a whole. Reurbishment performs have been becoming held at the palace when on 1577 a third fire destroyed the Scrutinio Room and the Fantastic Council Chamber, collectively with operates by Gentile da Fabriano, Pisanello, Alvise Vivarini, Vittore Carpaccio, Giovanni Bellini, Pordenone, and Titian. In the subsequent rebuilding perform it was decided to respect the original Gothic style, despite the submission of a neo-classical alternative designs by the influential Renaissance architect Andrea Palladio. Even so, there are some classical attributes — for example, since the 16th century, the palace has been linked to the prison by the Bridge of Sighs. As nicely as getting the ducal residence, the palace housed political institutions of the Republic of Venice until the Napoleonic occupation of the city in 1797, when its function inevitably changed. Venice was subejcted first to French rule, then to Austrian, and lastly in 1866 it became portion of Italy.

More than this period, the palace as occupied by a variety of administrative offices as properly as housing the Biblioteca Marciana and other essential cultural institutions within the city. By the finish of the 19th century, the structure was displaying clear indicators of decay, and the Italian government set aside significant funds for its restoration and all public offices have been moved elsewhere, with the exception of the State Workplace for the protection of historical Monuments, which is nonetheless housed at the palace’s loggia floor. In 1923, the Italian State, owner of the building, entrusted the management to the Venetian municipality to be run as a museum. Because 1996, the Doge’s Palace has been portion of the Venetian museums network, which comes under the management of the Fondazione Musei Civici di Venezia considering that 2008.

For far more data please go to en.wikipedia.org/wiki/Doge%27s_Palace,_Venice

Venice (Italian: Venezia [veˈnɛttsja] ( listen), Venetian: Venexia [veˈnɛsja]) is a city in northeast Italy which is renowned for the beauty of its setting, its architecture and its artworks. It is the capital of the Veneto area. In 2009, there have been 270,098 people residing in Venice’s comune (the population estimate of 272,000 inhabitants consists of the population of the whole Comune of Venezia about 60,000 in the historic city of Venice (Centro storico) 176,000 in Terraferma (the Mainland), mostly in the huge frazioni of Mestre and Marghera 31,000 live on other islands in the lagoon). Collectively with Padua and Treviso, the city is incorporated in the Padua-Treviso-Venice Metropolitan Region (PATREVE) (population 1,600,000).

The name is derived from the ancient Veneti people who inhabited the area by the 10th century B.C. The city historically was the capital of the Venetian Republic. Venice has been known as the &quotLa Dominante&quot, &quotSerenissima&quot, &quotQueen of the Adriatic&quot, &quotCity of Water&quot, &quotCity of Masks&quot, &quotCity of Bridges&quot, &quotThe Floating City&quot, and &quotCity of Canals&quot. Luigi Barzini described it in The New York Instances as &quotundoubtedly the most stunning city constructed by man&quot. Venice has also been described by the Occasions On the web as being one of Europe’s most romantic cities.

The city stretches across 117 little islands in the marshy Venetian Lagoon along the Adriatic Sea in northeast Italy. The saltwater lagoon stretches along the shoreline among the mouths of the Po (south) and the Piave (north) Rivers.

The Republic of Venice was a key maritime power during the Middle Ages and Renaissance, and a staging location for the Crusades and the Battle of Lepanto, as properly as a quite important center of commerce (particularly silk, grain, and spice) and art in the 13th century up to the finish of the 17th century. This made Venice a wealthy city throughout most of its history. It is also recognized for its a number of essential artistic movements, especially the Renaissance period. Venice has played an crucial part in the history of symphonic and operatic music, and it is the birthplace of Antonio Vivaldi.

Please pay a visit to en.wikipedia.org/wiki/Venice for further info…

Venice – A Sideways Glance at the Doge’s Palace!

Image by antonychammond
Explore #369 March 13th

The Doge’s Palace (Italian: Palazzo Ducale) is a gothic palace, and 1 of the principal landmarks of the city of Venice, northern Italy. The palace was the residence of the Doge of Venice, the supreme authority of the Republic of Venice, opening as a museum in 1923. Today it is 1 of the 11 museums of the Fondazione Musei Civici di Venezia program. In 2010 it was visited by 1.358.186 men and women.
In 810, Doge Angelo Partecipazio moved the seat of government from the island of Malamocco to the region of the present-day Rialto, when it was decided a palatium duci, a ducal palace, must be built. Nevertheless, no traces remains of that 9th century building as the palace was partially destroyed in the 10th century by a fire. The following reconstruction works had been undertaken at the behest of Doge Sebastiano Ziani (1172-1178). A fantastic reformer, he would drastically alter the complete layout of the St. Mark’s Square. The new palace was built out of fortresses, 1 façade to the Piazzeta, the other overlooking the St. Mark’s Basin.

Even though only few traces remain of that palace, some Byzantine-Venetian architecture characteristics can nonetheless be observed at the ground floor, with the wall base in Istrian stone and some herring-bone-pattern brick paving. Political changes in the mid-13th century led to the want to re-believe the palace’s structure due to the considerable enhance in the quantity of the Fantastic Council’s members. The new Gothic palace’s constructions began around 1340, focusing moslty on the side of the constructing facing the lagoon. Only in 1424, did Doge Francesco Foscari determine to extend the rebuilding operates to the wing overlooking the Piazzetta, serving as law-courts, and with a ground floor arcade on the outdoors, open 1st floor loggias operating along the façade, and the internal courtyard side of the wing, completed with the construction of the Porta della Carta (1442). In 1483, a violent fire broke out in the side of the palace overlooking the canal, where the Doge’s Apartments had been. After once again, an essential reconstruction became required and was comissioned from Antonio Rizzo, who would introduce the new Renaissance language to the building’s architecture.

An whole new structure was raised alongside the canal, stretching from the ponte della Canonica to the Ponte della Paglia, with the official rooms of the government decorated with performs comissioned from Vittore Carpaccio, Giorgione, Alvise Vivarini and Giovanni Bellini. An additional large fire in 1547 destroyed some of the rooms on the second floor, but luckily without having undermining the structure as a entire. Reurbishment works have been getting held at the palace when on 1577 a third fire destroyed the Scrutinio Space and the Excellent Council Chamber, with each other with operates by Gentile da Fabriano, Pisanello, Alvise Vivarini, Vittore Carpaccio, Giovanni Bellini, Pordenone, and Titian. In the subsequent rebuilding function it was decided to respect the original Gothic style, regardless of the submission of a neo-classical option styles by the influential Renaissance architect Andrea Palladio. Even so, there are some classical characteristics — for example, given that the 16th century, the palace has been linked to the prison by the Bridge of Sighs. As nicely as getting the ducal residence, the palace housed political institutions of the Republic of Venice until the Napoleonic occupation of the city in 1797, when its role inevitably changed. Venice was subejcted first to French rule, then to Austrian, and lastly in 1866 it became component of Italy.

More than this period, the palace as occupied by various administrative offices as nicely as housing the Biblioteca Marciana and other critical cultural institutions inside the city. By the end of the 19th century, the structure was showing clear indicators of decay, and the Italian government set aside significant funds for its restoration and all public offices had been moved elsewhere, with the exception of the State Workplace for the protection of historical Monuments, which is still housed at the palace’s loggia floor. In 1923, the Italian State, owner of the building, entrusted the management to the Venetian municipality to be run as a museum. Because 1996, the Doge’s Palace has been portion of the Venetian museums network, which comes beneath the management of the Fondazione Musei Civici di Venezia since 2008.

For much more information please go to en.wikipedia.org/wiki/Doge%27s_Palace,_Venice

Venice (Italian: Venezia [veˈnɛttsja] ( listen), Venetian: Venexia [veˈnɛsja]) is a city in northeast Italy which is renowned for the beauty of its setting, its architecture and its artworks. It is the capital of the Veneto region. In 2009, there have been 270,098 individuals residing in Venice’s comune (the population estimate of 272,000 inhabitants contains the population of the entire Comune of Venezia around 60,000 in the historic city of Venice (Centro storico) 176,000 in Terraferma (the Mainland), mainly in the massive frazioni of Mestre and Marghera 31,000 live on other islands in the lagoon). Together with Padua and Treviso, the city is incorporated in the Padua-Treviso-Venice Metropolitan Area (PATREVE) (population 1,600,000).

The name is derived from the ancient Veneti folks who inhabited the area by the 10th century B.C. The city historically was the capital of the Venetian Republic. Venice has been known as the &quotLa Dominante&quot, &quotSerenissima&quot, &quotQueen of the Adriatic&quot, &quotCity of Water&quot, &quotCity of Masks&quot, &quotCity of Bridges&quot, &quotThe Floating City&quot, and &quotCity of Canals&quot. Luigi Barzini described it in The New York Occasions as &quotundoubtedly the most lovely city constructed by man&quot. Venice has also been described by the Times On the internet as being one of Europe’s most romantic cities.

The city stretches across 117 small islands in the marshy Venetian Lagoon along the Adriatic Sea in northeast Italy. The saltwater lagoon stretches along the shoreline among the mouths of the Po (south) and the Piave (north) Rivers.

The Republic of Venice was a significant maritime power for the duration of the Middle Ages and Renaissance, and a staging region for the Crusades and the Battle of Lepanto, as nicely as a quite crucial center of commerce (particularly silk, grain, and spice) and art in the 13th century up to the end of the 17th century. This made Venice a wealthy city all through most of its history. It is also identified for its several important artistic movements, specially the Renaissance period. Venice has played an crucial role in the history of symphonic and operatic music, and it is the birthplace of Antonio Vivaldi.

Please check out en.wikipedia.org/wiki/Venice for further data…

Cool Machined Components Makers photos

Cool Machined Components Makers photos

Some cool machined elements makers photos:

Jaguar E-Kind four.2 at Samuel’s in Allston: Engine view

Image by Chris Devers
Quoting from Wikipedia: Jaguar E-Sort:

• • • • •

The Jaguar E-Variety (UK) or XK-E (US) is a British automobile manufactured by Jaguar amongst 1961 and 1974. Its combination of very good looks, higher functionality, and competitive pricing established the marque as an icon of 1960s motoring. A fantastic achievement for Jaguar, over seventy thousand E-Varieties were sold in the course of its lifespan.

In March 2008, the Jaguar E-Kind ranked very first in Everyday Telegraph list of the &quot100 most stunning cars&quot of all time.[2] In 2004, Sports Vehicle International magazine placed the E-Sort at number a single on their list of Leading Sports Cars of the 1960s.

Contents

1 Overview
two Idea versions
•• two.1 E1A (1957)
•• two.two E2A (1960)
three Production versions
•• three.1 Series 1 (1961-1968)
•• 3.2 Series two (1969-1971)
•• three.three Series three (1971-1975)
4 Limited edtions
•• 4.1 Low Drag Coupé (1962)
•• four.2 Lightweight E-Sort (1963-1964)
five Motor Sport
6 See also
7 References
8 External hyperlinks

Overview

The E-Variety was initially made and shown to the public as a grand tourer in two-seater coupé type (FHC or Fixed Head Coupé) and as convertible (OTS or Open Two Seater). The two+two version with a lengthened wheelbase was released many years later.

On its release Enzo Ferrari referred to as it &quotThe most beautiful automobile ever produced&quot.

The model was made in three distinct versions which are now usually referred to as &quotSeries 1&quot, &quotSeries two&quot and &quotSeries three&quot. A transitional series among Series 1 and Series 2 is identified unofficially as &quotSeries 1½&quot.

In addition, several limited-edition variants have been created:

• The &quot’Lightweight’ E-Variety&quot which was apparently intended as a sort of comply with-up to the D-Variety. Jaguar planned to generate 18 units but eventually only a dozen have been reportedly constructed. Of those, one particular is recognized to have been destroyed and two other people have been converted to coupé kind. These are exceedingly uncommon and sought soon after by collectors.
• The &quotLow Drag Coupé&quot was a a single-off technical physical exercise which was in the end sold to a Jaguar racing driver. It is presently believed to be element of the private collection of the existing Viscount Cowdray.

Concept versions

E1A (1957)

Following their good results at LeMans 24 hr via the 1950s Jaguars defunct racing department had been provided the brief to use D-Sort style building to create a road going sports vehicle, replacing the XK150.

It is suspected that the first prototype (E1A) was given the code based on: (E): The proposed production name E-Sort (1): First Prototype (A): Aluminium building (Production models employed steel bodies)

The automobile featured a monocoque design and style, Jaguar’s totally independent rear suspension and the properly proved &quotXK&quot engine.

The automobile was utilized solely for factory testings and was never ever formally released to the public. The automobile was ultimately scrapped by the factory

E2A (1960)

Jaguar’s second E-Sort notion was E2A which as opposed to E1A was constructed from a steel chassis and utilized a aluminium body. This auto was completed as a race auto as it was believed by Jaguar at the time it would supply a far better testing ground.

E2A utilized a three litre version of the XK engine with a Lucas fuel injection method.

Right after retiring from the LeMans 24 hr the auto was shipped to America to be employed for racing by Jaguar privateer Briggs Cunningham.

In 1961 the auto returned to Jaguar in England to be utilized as a testing mule.

Ownership of E2A passed to Roger Woodley (Jaguars buyer competition car manager) who took possession on the basis the auto not be utilized for racing. E2A had been scheduled to be scrapped.

Roger’s wife Penny Griffiths owned E2A till 2008 when it was presented for sale at Bonham’s Quail Auction. Sale value was US.five million

Production versions

Series 1 (1961-1968)

Series I

• Production
1961–1968[three] [four]

Body style(s)
two-door coupe
2-door 2+2 coupe
2-door convertible

Engine(s)
3.8 L XK I6
four.two L XK I6

Wheelbase
96. in (2438 mm) (FHC / OTS)
105. in (2667 mm) (2+2) [5]

• Length
175.3125 in (4453 mm) (FHC / OTS)
184.4375 in (4685 mm) (2+2) [five]

• Width
65.25 in (1657 mm) (all) [5]

• Height
48.125 in (1222 mm) (FHC)
50.125 in (1273 mm) (two+two)
46.5 in (1181 mm) (OTS)[5]

Curb weight
two,900 lb (1,315 kg) (FHC)
2,770 lb (1,256 kg) (OTS)
3,090 lb (1,402 kg) (two+2) [six]

• Fuel capacity
63.64 L (16.eight US gal 14. imp gal)[five]

The Series 1 was introduced, initially for export only, in March 1961. The domestic marketplace launch came four months later in July 1961.[7] The cars at this time used the triple SU carburetted three.8 litre six-cylinder Jaguar XK6 engine from the XK150S. The initial 500 cars constructed had flat floors and external hood (bonnet) latches. These vehicles are uncommon and a lot more valuable. After that, the floors were dished to offer much more leg space and the twin hood latches moved to inside the vehicle. The three.eight litre engine was elevated to four.two litres in October 1964.[7]

All E-Varieties featured independent coil spring rear suspension with torsion bar front ends, and four wheel disc brakes, in-board at the rear, all have been power-assisted. Jaguar was one of the 1st auto manufacturers to equip cars with disc brakes as regular from the XK150 in 1958. The Series 1 can be recognised by glass covered headlights (up to 1967), modest &quotmouth&quot opening at the front, signal lights and tail-lights above bumpers and exhaust ideas beneath the licence plate in the rear.

3.eight litre automobiles have leather-upholstered bucket seats, an aluminium-trimmed centre instrument panel and console (changed to vinyl and leather in 1963), and a Moss 4-speed gearbox that lacks synchromesh for 1st gear (&quotMoss box&quot). four.two litre automobiles have more comfy seats, enhanced brakes and electrical systems, and an all-synchromesh four-speed gearbox. four.two litre automobiles also have a badge on the boot proclaiming &quotJaguar four.2 Litre E-Type&quot (3.8 cars have a easy &quotJaguar&quot badge). Optional extras incorporated chrome spoked wheels and a detachable challenging leading for the OTS.

An original E-Sort challenging best is quite uncommon, and discovering 1 intact with all the chrome, not to mention original paint in decent situation, is rather challenging. For those who want a hardtop and aren’t fussy more than whether or not it is an original from Jaguar, many third parties have recreated the hardtop to almost exact specifications. The price ranges anywhere from double to triple the cost of a canvas/vinyl soft leading.

A two+2 version of the coupé was added in 1966. The two+two provided the selection of an automatic transmission. The physique is 9 in (229 mm) longer and the roof angles are distinct with a more vertical windscreen. The roadster remained a strict two-seater.

There was a transitional series of automobiles constructed in 1967-68, unofficially referred to as &quotSeries 1½&quot, which are externally comparable to Series 1 cars. Due to American stress the new characteristics have been open headlights, different switches, and some de-tuning (with a downgrade of twin Zenith-Stromberg carbs from the original triple SU carbs) for US models. Some Series 1½ vehicles also have twin cooling fans and adjustable seat backs. Series 2 features were steadily introduced into the Series 1, creating the unofficial Series 1½ cars, but constantly with the Series 1 physique style.

Less broadly identified, there was also appropriate at the finish of Series 1 production and prior to the transitional &quotSeries 1½&quot referred to above, a very modest quantity of Series 1 cars created with open headlights.[8] These are often referred to as &quotSeries 1¼&quot cars.[9] Production dates on these machines vary but in right hand drive type production has been verified as late as March 1968.[ten] It is thought that the low quantity of these vehicles created relative to the other Series make them amongst the rarest of all production E Types.

An open three.8 litre automobile, actually the very first such production auto to be completed, was tested by the British magazine The Motor in 1961 and had a leading speed of 149.1 mph (240. km/h) and could accelerate from -60 mph (97 km/h) in 7.1 seconds. A fuel consumption of 21.3 miles per imperial gallon (13.3 L/100 km 17.7 mpg-US) was recorded. The test car cost £2097 including taxes.[11]

Production numbers from Graham[12]:

• 15,490 3.8s
• 17,320 four.2s
• 10,930 2+2s

Production numbers from xkedata.com[13]: [omitted — Flickr doesn’t allow tables]

Series two (1969-1971)

Series II

• Production
1969–1971[three] [4]

Body style(s)
2-door coupe
2-door 2+2 coupe
two-door convertible

Engine(s)
4.two L XK I6

Curb weight
3,018 lb (1,369 kg) (FHC)
two,750 lb (1,247 kg) (OTS)
three,090 lb (1,402 kg) (2+two) [6]

Open headlights with out glass covers, a wrap-about rear bumper, re-positioned and bigger front indicators and taillights below the bumpers, much better cooling aided by an enlarged &quotmouth&quot and twin electric fans, and uprated brakes are hallmarks of Series 2 cars. De-tuned in US, but nevertheless with triple SUs in the UK, the engine is very easily identified visually by the adjust from smooth polished cam covers to a more industrial ‘ribbed’ look. Late Series 1½ automobiles also had ribbed cam covers. The interior and dashboard were also redesigned, with rocker switches that met U.S well being and safety regulations getting substituted for toggle switches. The dashboard switches also lost their symmetrical layout. New seats were fitted, which purists claim lacked the style of the originals but were certainly far more comfortable. Air conditioning and energy steering were accessible as factory possibilities.

Production according to Graham[12] is 13,490 of all sorts.

Series two production numbers from xkedata.com[13]: [omitted — Flickr doesn’t let tables]

Official delivery numbers by industry and year are listed in Porter[three] but no summary totals are provided.

Series 3 (1971-1975)

Series III

• Production
1971–1975

Physique style(s)
two-door 2+two coupe
two-door convertible

Engine(s)
five.3 L Jaguar V12

Wheelbase
105 in (2667 mm) (both)[six]

• Length
184.four in (4684 mm) (two+2)
184.5 in (4686 mm) (OTS)[6]

• Width
66. in (1676 mm) (two+2)
66.1 in (1679 mm) (OTS)[six]

• Height
48.9 in (1242 mm) (two+two)
48.1 in (1222 mm) (OTS)[6]

Curb weight
3,361 lb (1,525 kg) (2+2)
3,380 lb (1,533 kg) (OTS)[6]

• Fuel capacity
82 L (21.7 US gal 18. imp gal)[14]

A new 5.three L 12-cylinder Jaguar V12 engine was introduced, with uprated brakes and common power steering. The short wheelbase FHC body style was discontinued and the V12 was accessible only as a convertible and two+two coupé. The convertible utilized the longer-wheelbase two+two floorplan. It is very easily identifiable by the large cross-slatted front grille, flared wheel arches and a badge on the rear that proclaims it to be a V12. There were also a quite limited number of 4.two litre six-cylinder Series 3 E-Kinds constructed. These were featured in the initial sales literature. It is believed these are the rarest of all E-Types of any remaining.

In 2008 a British classic vehicle enthusiast assembled what is certainly the last ever E-Type from components bought from the finish-of-production surplus in 1974.[15]

Graham[12] lists production at 15,290.

Series 3 production numbers from xkedata.com[13]: [omitted — Flickr does not enable tables]

Restricted edtions

Two restricted production E-Sort variants have been produced as test beds, the Low Drag Coupe and Lightweight E-Variety, each of which have been raced:

Low Drag Coupé (1962)

Shortly soon after the introduction of the E-Sort, Jaguar management wanted to investigate the possibility of constructing a auto a lot more in the spirit of the D-Kind racer from which components of the E-Type’s styling and style had been derived. 1 vehicle was built to test the concept designed as a coupé as its monocoque design and style could only be created rigid enough for racing by using the &quotstressed skin&quot principle. Prior Jaguar racers were built as open-top vehicles due to the fact they had been based on ladder frame styles with independent chassis and bodies. Unlike the steel production E-Kinds the LDC used lightweight aluminium. Sayer retained the original tub with lighter outer panels riveted and glued to it. The front steel sub frame remained intact, the windshield was provided a much more pronounced slope and the rear hatch welded shut. Rear brake cooling ducts appeared subsequent to the rear windows,and the interior trim was discarded, with only insulation about the transmission tunnel. With the exception of the windscreen, all cockpit glass was plexi. A tuned version of Jaguar’s 3.eight litre engine with a wide angle cylinder-head design and style tested on the D-Sort racers was used. Air management became a significant problem and, even though significantly sexier looking and undoubtedly faster than a production E-Variety, the automobile was by no means competitive: the more quickly it went, the far more it wanted to do what its style dictated: take off.

The one particular and only test bed automobile was completed in summer season of 1962 but was sold a year later to Jaguar racing driver Dick Protheroe who raced it extensively and ultimately sold it. Considering that then it has passed by means of the hands of a number of collectors on each sides of the Atlantic and now is believed to reside in the private collection of the existing Viscount Cowdray.

Lightweight E-Sort (1963-1964)

In some ways, this was an evolution of the Low Drag Coupé. It made in depth use of aluminium alloy in the body panels and other components. Nevertheless, with at least 1 exception, it remained an open-leading car in the spirit of the D-Type to which this vehicle is a much more direct successor than the production E-Sort which is more of a GT than a sports automobile. The vehicles utilised a tuned version of the production three.eight litre Jaguar engine with 300 bhp (224 kW) output rather than the 265 bhp (198 kW) created by the &quotordinary&quot version. At least one particular car is recognized to have been fitted with fuel-injection.

The vehicles had been entered in various races but, as opposed to the C-Kind and D-Sort racing automobiles, they did not win at Le Mans or Sebring.

Motor Sport

Bob Jane won the 1963 Australian GT Championship at the wheel of an E-Kind.

The Jaguar E-Sort was really successful in SCCA Production sports auto racing with Group44 and Bob Tullius taking the B-Production championship with a Series-3 V12 racer in 1975. A couple of years later, Gran-Turismo Jaguar from Cleveland Ohio campaigned a four.two L 6 cylinder FHC racer in SCCA production series and in 1980, won the National Championship in the SCCA C-Production Class defeating a fully funded factory Nissan Z-car group with Paul Newman.

See also

Jaguar XK150 – predecessor to the E-Variety
Jaguar XJS – successor to the E-Sort
Jaguar XK8 – The E-Type’s existing and spiritual successor
Guyson E12 – a rebodied series III constructed by William Towns

References

^ Loughborough graduate and designer of E Kind Jaguar honoured
^ 100 most gorgeous vehicles
• ^ a b cPorter, Philip (2006). Jaguar E-variety, the definitive history. p. 443. ISBN -85429-580-1.
• ^ a b&quot’69 Series two Jaguar E Types&quot, Autocar, October 24, 1968
• ^ a b c d eThe Full Official Jaguar &quotE&quot. Cambridge: Robert Bentley. 1974. p. 12. ISBN -8376-0136-3.
• ^ a b c d e f g&quotJaguar E-Sort Specifications&quot. http://www.web-cars.com/e-sort/specifications.php. Retrieved 29 August 2009.
• ^ a b&quotBuying secondhand E-type Jaguar&quot. Autocar 141 (nbr4042): pages 50–52. 6 April 1974.
^ See Jaguar Clubs of North America concourse info at: [1] and more specifically the actual Series 1½ concourse guide at [two]
^ Ibid.
^ Examine proper hand drive VIN numbers given in JCNA concours guide referred to above with production dates for appropriate hand drive vehicles as reflected in the XKEdata database at [three]
^&quotThe Jaguar E-kind&quot. The Motor. March 22, 1961.
• ^ a b cRobson, Graham (2006). A–Z British Vehicles 1945–1980. Devon, UK: Herridge &amp Sons. ISBN -9541063-9-3.
• ^ a b chttp://www.xkedata.com/stats/. http://www.xkedata.com/stats/. Retrieved 29 August 2009.
^Every day Express Motor Show Assessment 1975 Automobiles: Page 24 (Jaguar E V12). October 1974.
^ jalopnik.com/5101872/british-man-cobbles-with each other-last-ja…

Imperial Performs, Menston

Image by tj.blackwell
G.L Murphy Machinery Ltd. was an industrial components manufacturer established in 1930. They had been primarily based in this mill, named Imperial Performs, on the rural outskirts of Menston in West Yorkshire. The business produced tools, belt driven machinery, transmissions and electrical equipment, specialising in products for tanners and leather companies in addition to glue and gelatine plants. They created batch runs of specialist components and carried out renovation function on a variety of machine components.

Imperial Works is primarily constructed from locally mined millstone grit and characteristics an desirable redbrick chimney. It covers a pretty expansive location amid rural farmland to the north of Menston, just off Otley Road. Some components of the site are nevertheless in use but this older section is now falling into fast decay. Most clues from items identified inside the G.L Murphy factory appear to date its closure to the 1970s.

Click here to view the rest of the image set for a tour inside the decaying old mill.

Cool Blanchard Grinding photos

Cool Blanchard Grinding photos

Check out these blanchard grinding images:

BLA Groundbreaking 050

Image by Pioneer Library System
The public celebrates the groundbreaking of a new Blanchard Public Library August 7, 2009.

BLA Groundbreaking 001

Image by Pioneer Library Technique
The public celebrates the groundbreaking of a new Blanchard Public Library August 7, 2009.

BLA Groundbreaking 024

Image by Pioneer Library System
The public celebrates the groundbreaking of a new Blanchard Public Library August 7, 2009.

Good Cylindrical Grinding photos

Good Cylindrical Grinding photos

Some cool cylindrical grinding images:

0004 -1 MADRID MEJORADA DEL CAMPO LA CATEDRAL CONSTRUIDA POR UN SOLO HOMBRE -JUSTO GALLEGO-/THE CATHEDRAL Built BY A MAN ONLY

Image by Jose Javier Martin Espartosa
La Catedral de Justo es un edificio de grandes proporciones, a semejanza de una gran catedral cristiana, situada en Mejorada del Campo (Madrid, España). Está siendo construida por un solo hombre, Justo Gallego Martínez. Empezó a construirla en en un terreno de propiedad de su familia el 12 de octubre 1961, tras ser expulsado del monasterio cirtesciense por estar enfermo de tuberculosis. Al producirse su curación, decidió agradecérselo a Dios y a la Virgen con la construcción de esta obra. Poco a poco, valiéndose del patrimonio familiar de que disponía, vendiendo su tierra y gracias a donaciones privadas sigue levantando su Catedral.
Justo lleva casi 50 años construyendo su imponente obra, y a excepción de algunas ayudas esporádicas, todo lo hizo solo. Lo que más sorprende es que este hombre no es ni arquitecto, ni albañil, ni tiene ninguna formación relacionada con la construcción. Su formaciòn se quedó interrumpida al estallar la Guerra Civil. Además no existen planos ni proyecto oficial de la catedral, todo está en su cabeza.
Se trata de un edificio con elementos arquitectónicos destacables. Aunque su constructor la denomina catedral, y así es conocida, en realidad no es un templo al no estar consagrado ni ser reconocido como tal por la diócesis de Alcalá de Henares.
Los nativos del Mejorada del Campo conocen la obra como ‘la catedral del loco’. Desde hace 50 años Justo lleva martilleando, hormigonando o subiendo paredes desde la madrugada hasta el atardecer. Esa extraordinaria y única obra hizo famoso el pequeño pueblo a 20km de Madrid. En el año 2005 una campaña publicitaria de la bebida ‘Aquarius’ dio fama universal a Justo y a su catedral. El Museo de Arte Moderno de Nueva York dedicó una exposición de fotos a esta original obra sacra.
La Catedral Catedral de Justo, vista lateral. Ocupa un terreno de four.740 metros cuadrados que vale 1.170.000 euros. Hasta ahora, la catedral mide 35 metros de altura calculados desde el nivel de cota de la planta baja hasta la altura de coronaciòn de la cúpula. Las dos torres miden 60 metros de largo y tienen un anchura de 25 metros. Cuenta con todos los elementos de una catedral clásica: cripta, claustro, escalinata, arcadas, pórticos, escaleras de caracol, etcétera. Esta obra colosal está dedicada a la patrona de la Hispanidad, la Virgen del Pilar, y está construida con materiales donados por empresas y particulares. La mayor parte de los materiales de construcción que don Justo utiliza son reciclados. Usa tanto objetos de la vida diaria como materiales desechados por las constructoras y por una fábrica de ladrillos cercana. Para realizar las columnas utiliza bidones de gasolina viejos como moldes, para los pilares usa botes de Cola Cao rellenados de hormigón y una rueda de bicicleta hace las veces de polea.
[editar] El interior Vista hacia la nave de la epístola Cabe destacar su gran planta, de tres naves. La central es más ancha que las demás, siguiendo el esquema básico de una catedral. Todas ellas están cubiertas por bóvedas de medio cañón, que actualmente en fase de construcción por lo que se podía ver el modo de realizarlas, con alambres curvos y hormigón. Para realizar los techos, Justo utilizó un material ligero, a modo de grava, que actualmente se usa con el hormigón en construcciones contemporáneas para dar más ligereza a los edificios. Así mismo, la nave central tiene un triforio y probablemente una futura tribuna que rodeará toda la superficie para poder acceder a todo el perímetro en esa altura. La cabecera se organiza en un gran ábside donde se coloca el altar. Por fuera podemos ver absidiolos laterales y torres. En la parte central de la catedral, se alza la la cúpula sobre pechinas. La cubierta fue realizada con chapas superpuestas, al igual que la bóveda de medio cañón de la nave. Las paredes están horadadas para que penetre la luz, en relación con la idea medieval de relacionar a Cristo con la luz. Todas ellas irían decoradas con vidrieras.
[editar] El patio Interior Hormigón, alambres, hierros….dispuestos de una forma especial para dar las diferentes formas. Parece todo demasiado bien hecho por un sólo hombre. Una de las cosas más sorprendentes son los ladrillos. Se puede apreciar en toda la catedral que los ladrillos más &quotviejos&quot, los que están más abajo, son de forma irregular y unidos unos con otros prácticamente como en el juego del &quotTetris&quot. Estos ladrillos, defectuosos, los recogía Justo en una fábrica cercana que los desechaba.
[editar] La cúpula Sin duda es lo más impresionante de todo el lugar, siempre y cuando tengamos en cuenta que la ha realizado un hombre sólo y sin ayuda. Se puede apreciar muy bien desde una zona privilegiada del patio anterior.
Hay una gran cantidad de bustos que decoran la parte superior de la catedral, al lado de la cúpula que recuerdan mucho a las esculturas que se ponían en los edificios renacentistas.
La cripta Como buena catedral dispone de una Cripta accesible tanto por el interior principal, como por el patio a través de una puerta lateral. No deja de ser curioso que encontremos algo así. No en vano, debemos pensar que el bueno de Justo hizo nada más y nada menos que tres niveles de edificio, con toda la dificultad que ello conlleva. En el altar principal incluso vemos una lata de Aquarius, muy apropiada en ese lugar.
El ala derecha Existen muchas más fotos del ala derecha y de la parte inferior de la escalinata principal. Se pueden ver muchísimas columnas que están realizadas de una forma totalmente artesanal. Con los grandes cubos cilíndricos de pintura, Justo los llena de hormigón para dar la forma deseada y dejándolos secar, saca los bloques y los une mediante hierros y cables.
Las barandillas y algunas uniones están hechas con hierros de obra que parecen haber sido desdoblados al recogerlos de vertederos, unidos con hormigón, y rodeados de trozos de cable de electricidad o cualquier trozos de goma.
En esta parte del terreno podemos encontrar varias edificaciones curiosas. Por ejemplo, una utilizada de almacén, con cubierta en varias naves a doble vertiente cada una, a modo de mar de chapa.
Si conocemos la biografía de Justo, podemos intuir que podría ser un corral o incluso un granero, ya que en su casa original tiene estas dependencias y su planta correspondería. Es una edificación cuadrada, de grandes proporciones y diáfana, por lo cual bien podría ser lugar del ganado, de paja o de leña para el frío.
A su lado también encontramos otras dependencias mucho menos construidas. Una de ellas era el lugar de descanso de sus ayudantes de verano y, pasada ésta, se encuentra un sendero de piedras para acceder a la puerta principal.
————————————————————————————————————————————————-
The Cathedral of Justo is a creating of big proportions, reminiscent of a fantastic Christian Cathedral, situated in Mejorada del Campo (Madrid, Spain). It is being constructed by one man, Justo Gallego Martínez. He started to construct in on a website owned by his family members on October 12, 1961, following being expelled from the cirtesciense monastery to be ill with tuberculosis. At the time of healing, decided to thank them for God and the Virgin with the construction of this perform. Little by tiny, using household wealth offered, promoting their land and private donations it still kicking up its Cathedral.
Just take almost 50 years developing his impressive perform, and with the exception of some sporadic aid, all just produced it. What is more surprising is that this man is not architect or Mason, nor has any education connected to building. Its formation was interrupted with the outbreak of the Civil War. In addition there are no plans or official project of the Cathedral, almost everything is in your head.
It is a creating with notable architectural components. Even though its constructor known as a cathedral, and it is effectively recognized, in truth it is not a temple to be consecrated nor be recognized as such by the Roman Catholic Diocese of Alcalá de Henares.
The natives of the Mejorada del Campo know the work as ‘the Cathedral of the mad’. Given that 50 years fair is martilleando, hormigonando or raising walls from the morning until sunset. This extraordinary and special operate produced renowned the small village 20 km from Madrid. In 2005 a publicity campaign for the ‘aquarius’ drink gave universal fame to fair and its Cathedral. The Museum of contemporary art in New York devoted an exhibition of photographs to this original sacred operate.

the Catedral Catedral of fair, side view.It occupies an region of 4.740 square metres worth 1.170.000 euros. So far, the Cathedral measures 35 meters high calculated from height of the ground floor level to the height of Coronation of the dome. The two towers measuring 60 meters in length and have a width of 25 meters. Account with all the components of a classical Cathedral: crypt, cloister, steps, arches, arcades, spiral staircases, and so on. This colossal work is committed to the patron saint of Hispanic Heritage, the Virgin of the pillar, and is constructed with components donated by men and women and organizations. Most of the developing materials employed by don Justo are recycled. It makes use of both objects of daily life as supplies discarded by building businesses and a nearby brick factory. To make the columns used old petrol drums such as moulds, to the pillars usa cans of Cola Cao filled concrete and serves as a bicycle wheel pulley.
[edit] The interiorVista towards the nave of the epístolaCabe highlight its significant plant, 3 naves. The central is wider that the other people, according to the standard scheme of a cathedral. All of them are covered with barrel vaults, which at present beneath building for what could be the way of realizing them, with curved wire and concrete. To make the roofs, fair used a light, by way of gravel material at the moment used with concrete in contemporary construction to give more lightness to the buildings. Likewise, the nave has a clerestory and most likely a future forum that around the whole surface to be in a position to access the perimeter at that height. The header is organized in a big apse exactly where the altar is placed. On the outside we can see lateral apses and towers. In the central element of the Cathedral, stands the dome on pendentives. The cover was made with overlapping sheets, as well as the Middle vault of the nave. The walls are carved so that it penetrates the light, in connection with the medieval concept of relating to Christ with the light. All of them were decorated with stained glass Windows.
[edit] The courtyard InteriorHormigón, wires, irons…. arranged in a particular way to give distinct approaches. It seems all as well well carried out by a man. One particular of the most surprising things are the developing blocks. You can see all the Cathedral the bricks &quotolder&quot, those who are below, are in an irregular manner and linked with each other practically as in the game of &quottetris&quot. These bricks, defective, picked up the fair in a nearby factory that desechaba.
The cúpula Sin question is the most impressive of all more than the spot, if we bear in mind that a man has made only and with no aid. You can see very nicely from a privileged region of the previous courtyard.
There are a lot of busts that decorate the prime of the Cathedral, subsequent to the dome that a lot resemble the sculptures that have been put in the Renaissance buildings.
The Cathedral great criptaComo has a crypt accessible each by the principal interior courtyard by means of a side door. Nonetheless be curious to find some thing like this. Not in vain, we believe that the excellent fair did absolutely nothing far more and practically nothing less than three levels of developing, with all the difficulty that this entails. In the altar principal see even a can of Aquarius, extremely appropriate there.
The wing derecha Existen several a lot more pictures of the correct wing and the bottom of the primary staircase. You can see several columns that are totally handmade. With the massive cylindrical buckets of paint, just fills them with concrete to give the preferred shape and leaving them to dry out the blocks and unites them with irons and cables.
The railings and some unions are created with iron operate that appear to have been unfolded to collect landfill, with each other with concrete and surrounded by pieces of cable of electricity or any pieces of rubber.
In this part of the ground can be identified many curious landmarks. For example, a used warehouse, coated in a number of ships to double slope, as a sea of sheet metal.
If we know the biography of fair, we can guess that it may be a poultry or even a barn, in his original Property has these dependencies and their plant would pay. It is a square, massive and clear, so it could properly be location of cattle, straw or wood for the cold.
There are also other significantly significantly less built units to their side. 1 of them was the resting place of his summer time assistants, and soon after it, is a trail of stones for access to the principal gate.

“夜間足球 Nighttime Football (Soccer)” / 香港體育全景攝影 Hong Kong Sports Panoramic Photography / SML.20130317.7D.35562-SML.20130317.7D.35578-Pano.Cylindrical.118×36.7

Image by See-ming Lee 李思明 SML
Photo by request. Chinese males playing soccer at night. Panorama stitched using 17 7D RAW captures with the 17-40 f/4L. Again, seams are not best and you may well appear far more players then there truly are due to the fact it is technically a time-lapsed image.

# SML Data
+ Date: 2013-03-17 22:19:41 GMT+0800
+ Dimensions: 12404 x 3147
+ Exposure: 1/20 – 1/15 sec at f/five.
+ Focal Length: 40 mm
+ ISO: 3200
+ Flash: Did not fire
+ Camera: Canon EOS 7D
+ Lens: Canon EF 17-40mm f/4L USM
+ Panorama FOV: 118 degree horizontal, 36.7 degree vertical
+ Panoramic Projection: Cylindrical
+ GPS: 22°25’11&quot N 114°13’44&quot E
+ Altitude: 15.7 m
+ Place: 中國香港馬鞍山遊樂場人造草地足球場 中国香港马鞍山游乐场人造草地足球场 Artificial Turf Soccer Pitch, Ma On Shan Recreation Ground, Ma On Shan, Hong Kong, China
+ Serial: SML.20130317.7D.35562-SML.20130317.7D.35578-Pano.Cylindrical.118×36.7
+ Workflow: Hugin 2012, Lightroom 4
+ Series: 體育 Sports, 男 Guys, 全景攝影 Panoramic Photography

“夜間足球 Nighttime Football (Soccer)” / 香港體育全景攝影 Hong Kong Sports Panoramic Photography / SML.20130317.7D.35562-SML.20130317.7D.35578-Pano.Cylindrical.118×36.7
/ #體育 #Sports #男 #Guys #SMLMen #全景 #Pano #SMLPano #CCBY #SMLPhotography #SMLUniverse #SMLProjects
/ #中國 #中国 #China #香港 #HongKong #攝影 #摄影 #photography #城市 #Urban #足球 #Football #Soccer #夜 #Evening

Cool Cnc Cutting Machine photos

Cool Cnc Cutting Machine photos

Some cool cnc cutting machine photos:

LAUKO

Image by Fagor Automation
LAUKO PFAUTER RS9K
Retrofit of Horizontal cutting machine
Retrofit de Talladora horizontal
CNC 8055TCO
January 2012

LAUKO

Image by Fagor Automation
LAUKO PFAUTER P900
Retrofit of Vertical cutting machine
Retrofit de Talladora Vertical
CNC 8055MCO
January 2012

SteelTailor portable plasma cnc cutting machine

Image by SteelTailor Ltd.
SteelTailor is cutting, cuttting just fine!

Nice Element Manufacturing Company photos

Nice Element Manufacturing Company photos

A few good component manufacturing firm photos I located:

The Bristol Aeroplane Company

Image by brizzle born and bred
The Bristol F.two Fighter was a British two-seat biplane fighter and reconnaissance aircraft of the Initial World War flown by the Royal Flying Corps. It is often just known as the Bristol Fighter or popularly the &quotBrisfit&quot or &quotBiff&quot. In spite of getting a two-seater, the F.2B proved to be an agile aircraft that was able to hold its own against opposing single-seat fighters. Possessing overcome a disastrous start off to its career, the F.2B’s solid design and style ensured that it remained in military service into the 1930s, and surplus aircraft have been well-liked in civil aviation.

en.wikipedia.org/wiki/File:Bristol_F2B_D8096_flying_1.jpg

The Bristol Aeroplane Firm, originally the British and Colonial Aeroplane Business, was each a single of the initial and one particular of the most crucial British aviation organizations, designing and manufacturing each airframes and aero engines. Notable aircraft made by the business include the ‘Boxkite’, the Bristol Fighter, the Bulldog, the Blenheim, the Beaufighter and the Britannia, and much of the preliminary operate which lead to the Concorde was carried out by the business. In 1956 its major operations had been split into Bristol Aircraft and Bristol Aero Engines. In 1959 Bristol Aircraft merged with numerous major British aircraft firms to type the British Aircraft Corporation (BAC), and Bristol Aero Engines merged with Armstrong Siddeley to form Bristol Siddeley.

BAC went on to turn out to be a founding component of the nationalised British Aerospace, now BAE Systems. Bristol Siddeley was purchased by Rolls-Royce in 1966, who continued to develop and industry Bristol-developed engines. The BAC operates have been in Filton, about 4 miles (6.4 km) north of Bristol city centre. BAE Systems, Airbus, Rolls Royce and MBDA nevertheless have a presence at the Filton website where the Bristol Aeroplane Firm was located.

The Incredible Hulk punched a hole in the wall. Abandoned Barber-Colman factory in Rockford, Illinois

Image by slworking2
History of the Barber-Colman Firm

Historically a single of Rockford’s biggest manufacturers.

Started with the founding of the Barber &amp Colman Business in 1894 – partnership among Howard Colman, an inventor and entrepreneur, and W. A. Barber, an investor. [Right now he would possibly be deemed a venture capitalist.] Colman’s first patent and marketable invention was the Creamery Check Pump employed to separate buttermilk and dispense skimmed milk.

Colman’s textile production inventions led the company on its rapid rise as a worldwide leader in the style and manufacture of diversified products. Certain things made for the textile market included the Hand Knotter and the Warp Tying Machine. By way of these innovations, Barber &amp Colman was able to build its 1st plant on Rock Street in Rockford’s Water Energy District, and to establish branch offices in Boston MA and Manchester, England.

Incorporated as Barber-Colman in 1904 and built 5 new key structures on their internet site by 1907.

Later innovations for the textile market integrated an Automatic Winder, Higher Speed Warper and Automatic Spoolers. By 1931, the textile machinery division had branch production facilities in Framingham MA Greenville SC Munich, Germany and Manchester. This component of the enterprise flourished via the mid-1960s but then declined as other divisions expanded.

Branched out from the textile industry into machine tools in 1908 with Milling Cutters. Barber-Colman designed machines employed at the Fiat plant in Italy (1927) and the Royal Typewriter Co. outdoors Hartford CT. By 1931, the Machine Tool and Small Tool Division of Barber-Colman listed branch offices in Chicago, Cincinnati and Rochester NY.

As element of its commitment to building a skilled operate force, Barber-Colman began the Barber-Colman Continuation College for boys 16 and older shortly right after the business was founded. It was a 3-year apprentice plan that trained them for manufacturing jobs at Barber-Colman and paid them hourly for their function at rate that enhanced as their proficiency improved. The program was operated in conjunction with the Rockford Vocational School.

To foster continued inventions, an Experimental Division was established with the responsibility of continually establishing new machines. A lab was 1st installed in 1914 and was divided into two components – a chemistry lab to offer thorough analysis of all metals and their element properties, and a metallurgical lab to test the effectiveness of heat remedy for hardening supplies. Innovations in the Experimental Division laid the groundwork for the company’s movement into the design and style and improvement of electrical and electronic products, and energy management controls.

BARBER-COLMAN became involved in the electrical and electronics business in 1924 with the founding of the Electrical Division. Very first product was a radio operated electric garage door opener controlled from the dashboard of a automobile. Sadly, it was also costly to be sensible at the time. The division’s key item in its early years was Barcol OVERdoors, a paneled wood garage door that opened on an overhead track. Many designs have been provided in 1931, some of which had the look of wood hinged doors. This division sooner or later expanded into four separate ones that created and developed electronic handle instruments and systems for manufacturing processes modest motors and gear motors utilised in merchandise such as vending machines, antennas and X-ray machines electronic and pneumatic controls for aircraft and marine operations and electrical and electronic controls for engine-powered systems.

In the late 1920s, the Experimental Department began conducting experiments with temperature manage instruments to be utilized in properties and other buildings and the Temperature Control Division was born. Over time, BARBER-COLMAN became known worldwide leader in electronic controls for heating, ventilating and air conditioning. These are the goods that continue its name and reputation these days.

The death of founder Howard Colman in 1942 was sudden but the firm continued to expand its operations beneath altering leadership. Ground was broken in 1953 for a manufacturing creating in neighboring Loves Park IL to residence the overhead door division and the Uni-Flow division. 3 later additions had been produced to that plant.

The divestiture of BARBER-COLMAN divisions began in 1984 with the sale of the textile division to Reed-Chatwood Inc which remained at BARBER-COLMAN’s original internet site on Rock Street till 2001. The machine tooldivision, the company’s second oldest unit, was spun off in 1985 to Bourn and Koch, another Rockfordcompany. At that time, it was announced that the remaining divisions of the BARBER-COLMAN Firm would concentrate their efforts on procedure controls and cutting tools. These moves decreased local employment at BARBER-COLMAN’s several areas to about 2200. The remaining divisions were eventually sold as well, but the BARBER-COLMAN Organization name continues to exist these days as 1 of 5 subsidiaries of Eurotherm Controls Inc whose worldwide headquarters are in Leesburg VA. The Aerospace Division and the Industrial Instruments Division nonetheless operate at the Loves Park plant, employing 1100 workers in 2000. The historic complicated on Rock Street was vacated in 2001 and the house purchased by the City of Rockford in 2002.

In depth documentation from the Experimental Division was left at the Rock Street plant when the firm moved out and was nonetheless there when the internet site was purchased by the City of Rockford. These documents are now housed at the Midway Village Museum.

Nice Machining Turning photos

Nice Machining Turning photos

Verify out these machining turning pictures:

Drink Machine-Jimin

Image by nist6ss

Toronto Distillery District 02

Image by thelearningcurvedotca
Toronto Distillery District, Toronto, Canada. The Distillery District is turning out to be one of THE favored locations to go in the city to just wander around for a couple of hours, have a pint, do some individuals watching and take some images.

Shameless Self Promotion:
Homepage&nbsp|&nbspFacebook&nbsp|&nbspTwitter&nbsp|&nbspfluidr&nbsp|&nbsp500px
Prints:
ArtWanted&nbsp|&nbspFine Art America&nbsp|&nbspRedBubble&nbsp|&nbspUntapped Supply